HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 



Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                                          
 

ELETTROCOMPANIET   ECI -5MKII              Listino  ufficiale  €.   4.850,00      

Integrato linea, 120 watts ch. telecomando, misurati a 240 V

The Electrocompaniet ECI 5 is a DC coupled high performing, fully balanced, remote controlled integrated stereo amplifier with all latest upgrades included. Six inputs: two balanced three single and one direct. Outputs: Balanced, single and REC. Balanced motorized volume control that does not degrade the sonic qualities of the unit.Relay input switching. Volume and input sources can easily be navigated via four Navigator touch buttons on the front panel or from the remote control. The select source is shown in the Navigator window.The ECI 5 Features Electrocompaniet's unique FTT (Floating Transformer Technology) power supply designs. The ECI 5 contains the same components used in our most prestigious models. A current reservoir of 70.000uF delivers 2 x 120W of clean and powerful dynamics into an 8 ohms load. Like the rest of our amplifiers, ECI 5 is stable down to 0.5 ohms. The balanced output of the ECI 5 can feed an additional power amplifier in a bi-amped set-up.Technical specifications All measurements are made at 120V / 240V //50Hz / 60Hz Preamplifier section Nominal Input impedance 330Kohm Max. input level > 10 Volt RMS Equivalent input noise < 4 µV Pre-out gain balanced output (XLR) 1,37x Pre-out gain single output (RCA) 1,25x Amplifier section Output Impedance (20 Hz -20 kHz) < 0,01 Ohm Max. peak current > 80 A THD(measured at 1 kHz half power, 8 W) < 0,007 % THD(measured at 1 kHz -1 dB 8 W) < 0,008 % Input sensitivity for rated output single ended 1,4V Input sensitivity for rated output balanced 0,7V Input sensitivity for rated output HT 6,5V Rated output power 8 ohms 2 x 120 W 4 ohms 2 x 200 W 2 ohms 2 x 350 W Power consumption (no load or signal) 160 W Dimensions Width 483 mm / 19 inches Depth 405 mm / 16 inches Height 135 mm / 5,3 inches Weight 16Kg / 35 lbs.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                                           

ELETTROCOMPANIET   EC 4.8                            Listino  ufficiale  €.   4.450,00      

Preamplificatore 2 canali Reference.

For more than 30 years, the name "Electrocompaniet" has been synonymous with the manufacture of great sounding power amplifiers. The numerous prestigious international awards, as well as top ranking reviews, attest to the success and appreciation of the amplifiers.Since 1999, we have had the same level of world-wide recognition with our reference CD player, the Electrocompaniet EMC 1. The obvious missing link has been a preamplifier matching the quality of the award-winning power amplifiers and reference CD player.With the new Electrocompaniet two-channel EC 4.8 preamplifier, the missing link is now removed.With its outstanding performance, excellent resolution, superb control and precise musical rendering, we have succeeded making a preamplifier that is  true to our slogan,“Closing the gap to the master”. Our new two-channel EC 4.8 preamplifier is sure to make all good power amplifiers sound even better !The EC4.8 preamplifier is designed to fill our need for a advanced preamplifier in a higher price range. The preamplifier is designed as a slimline version, with a fully balanced electronic solution from input to output. It is designed as two separate mono preamplifiers, each with it’s own power supply. This preamplifier can be used with the included IR remote controller or as an option, together with the RF based remote controller ECT 2. The EC4.8 has the new SPAC network for safety control of the connected power amplifiers.Technical specifications All measurements are made at 120V / 240V //50Hz / 60Hz Input impedance balanced (fixed) 47 Kohm Output impedance 100 ohm  Input level (Single ended) >15 Vp-p Input level (balanced) >30 Vp-p Max output level (Single ended) >15 Vp-p Max output level (Balanced) 30 Vp-p Gain - 111dB to +6dB Noice Floor <-130dB (@ 0dB gain)  Frequency responce 0.5 - 200.000 Hz Channel Seperation > 120dB THD + N <0.002% MD TBD Power consumption (no load or signal) 30 W Dimensions and Waight  Width 483 mm / 19 inch  Depth 386 mm / 16.1 inch  Height 76 mm / 4.5 inch Weight 9 kg Inputs  Balanced 2 x2 channel  Single ended 3 x 2 channel  Control Ports  Nettwork 3 x SPAC  Programming 1 x USB  Outputs  Balanced 1 x 2 channel Single ended Record Out
 


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ELETTROCOMPANIET   AW 250R                          Listino  ufficiale  €.   8.050,00      

Finale stereo. 250/380/625/1.100 W RMS per canale a 8/4/2/1 ohms a 240 V.  >100 A picco. Alimentazione FTT. Usabile anche in mono a ponte

AW 250R  The Electrocompaniet AW250R power amplifier is known for its uncolored and excellent reproduction qualities. From the first note of any familiar recording, you will be captivated by the AW250R and by the musical enjoyment it will give you.The AW250R incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of conventional power supply designs, as well as first class overall circuit design and state-of-the-art components. The AW250R features a balanced link to additional power amplifier(s). Compared to more expensive High-End power amplifiers, with lesser performance, you will truly cherish the AW250R. The Electrocompaniet AW250R features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power.Technical specifications All measurements are made at 120V / 240V //50Hz / 60Hz Amplifier section  Output Impedance (20 Hz - 20 kHz) < 0,008 ohm  RCA (single) input impedance 220 kohm  XLR (balanced) input impedance 110 kohm  Input sensitivity for rated output 1 V  Max. peak current > 100 A THD (measured at 1 kHz  half power, 8 W) < 0,001 % THD (measured at 1 kHz  -1 dB, 8 W) < 0,001 % Noise (measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV 10 Hz - 30 kHz : 100 µV Rated output power  8 ohms 2 x 250 W  4 ohms 2 x 440 W  2 ohms 2 x 625 W  1 ohms 2 x 1100 W  Power consumption (no load or signal) 230 W  Dimensions  Width 483 mm / 19 inches  Depth 450 mm / 17 inches  Height 210 mm / 8.2 inches  Weight 39 kg. / 85.8 lbs.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ELETTROCOMPANIET   AW 180                             Listino  ufficiale  €.   4.840,00      

Finale mono, 180w/8 ohm-350w/4 ohm, Mono Balanced, 100 A picco, misurati a 240 V. Prezzo singolo  finale .

AW 180 monoblock The Electrocompaniet AW180M monaural power amplifier represents the ultimate fidelity in sound reproduction.Audiophiles, recording engineers, record producers and reviewers around the world rely on the AW180M’s faithful reproduction of the original master recording.The stunning capabilities of the Electrocompaniet AW180M cannot be explained – they have to be experienced.The AW180M incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply, a first class overall circuit design and state-of-the-art components. The Electrocompaniet AW180M features a balanced link to additional amplifier(s) for bi-amping. It can easily beused in bridged mode, delivering up to four times the power.Technical specificationsAll measurements are made at 120V / 240V //50Hz / 60Hz Amplifier section Output Impedance (20 Hz - 20 kHz) < 0,008 ohm RCA (single) input impedance 220 kohm XLR (balanced) input impedance 110 kohm Input sensivity for rated output 1 V Max. peak current > 100 A THD (measured at 1 kHz half power, 8 W) < 0,001 % THD (measured at 1 kHz -1 dB, 8 W) < 0,001 % Noise (measured with both inputs shorted) 400 Hz - 30 kHz : 90 µV10 Hz - 30 kHz : 100 µV Rated output power 8 W 180 W 4 W 350 W 2 W 650 W Power consumption (no load or signal) 115 W Dimensions Width 215 mm / 8.5 inches Depth 470 mm / 18.5 inches Height 288 mm / 11.3 inches Weight 22 kg. / 48.4 lbs.

ELETTROCOMPANIET   AW 600                                                 Listino  ufficiale  €.   6.350,00      

Finale mono. 400/730/1200 W RMS a 8/4/2 ohm a 240 V. 150 A picco.  Alimentazione FTT. Trafo 650 VA. Banco da 150.000 uF. Stabile sino a 0,5 ohm. Link bilanciato per addizionale amplificatore( i ) per bi-amping. Prezzo singolo  finale .

AW400 Mono block Monaural Class A Reference Amplifier The Electrocompaniet AW400 is a powerful mono amplifier, with a characteristic fast and clean sound. The poweramplifier is analytic, and build for dynamic reproduction for low level as well as high level playback.The Electrocompaniet AW400 power amplifier is based on the design philosophy of the highly acclaimed AW180 M monaural power amplifier. The AW400 incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply. First class overall circuit design and state-of-the-art components. Uncompromising sonic and mechanical quality. a 650 VA FTT transformer and a current reservoir of 150.000uF delivers  1 x 400 W of clean and powerful dynamics into an 8 Ohms load. Just like the rest of our power amplifiers, the AW 400 is stable down to 0,5 Ohms. The Electrocompaniet AW 400 features a balanced link to additional amplifier(s) for bi-amping. It can easily be used in bridged mode, delivering up to four times the power.All measurements are made at 120V / 240V //50Hz / 60Hz Amplifier section  Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% Input Impedance (Fixed) 330 kohm Output Impedance (20 Hz-20kHz) < 0,01 Ohm Frequency response (DC - 65 kHz) - 3 dB Input level for rated output 1 V RMS Max. peak current > 150 A THD(measured at 1 kHzhalf power,8W) < 0,006 % THD (measured at 1 kHz -1 dB, 8 W) < 0,007 % Noise  (measured with both inputs shorted) 400 Hz - 30 kHz : 130 µV DC - 30 kHz : 200 µV Rated output power 8 ohms 400 4 ohms  765 2 ohms Power consumption (no load or signal) 230 W Dimensions  Width 358 mm / 14.1 inches Depth 470 mm / 18.5 inches Height 261 mm / 10.2 inches Weight 25 kg. / 55 lbs.

ELETTROCOMPANIET   AW 600                                                       

Finale mono REFERENCE. 600/1200/2400 W RMS 8/4/2 ohm 240 V >150 A picco.  NEMO State-of-the-Art. Alimentazione FTT.  Accoppiato in C.C. dall'ingresso all'uscita. Peso 41 kg cadauno. Viene detto essere stato progettato per pilotare le casse B&W modello Nautilus.Prezzo singolo  finale .NEMO (AW600) Mono Block A new standard for power amplification

The Electrocompaniet AW600 monaural power amplifier represents the ultimate fidelity in sound reproduction. Audiophiles, recording engineers, record producers and reviewers around the world rely on the AW180M’s faithful reproduction of the original master recording. The stunning capabilities of the Electrocompaniet AW600 cannot be explained – they have to be experienced. The AW600 incorporates such refined features as: FTT (Floating Transformer Technology) power supply, capable of delivering twice the current of a conventional power supply, a first class overall circuit design and state-of-the-art components Power and control, but with a liquid, spacius and effortless aproach that removes any hint of electronic interference, leaving only sheer, clear music in their wake. Extreme sonic value for money, they set a new standard for power amplification. Audio&Video South Africa "Absolut Spitzenklasse, Überagend-58 punkte." (59 points is the highest score on a poweramplifier tested in Stereoplay, and it cost 2-3 times more) Stereoplay Germany "A Manly Man Of An Amplifier" - Up with the best valvejobs I've ever heard, and grainless liquidity that no other solid-state amplifier I've heard can match. A cross between a singel ended triode and Arnold Schwarzenegger. Unlimited power and bottom slam, handles complexity without a hint of confusion. Enormously wide and deep soundstage. I would pick them over every other solid-state amplifier I've heard. Ultimate Audio, Winter 2000 All measurements are made at 120V / 240V //50Hz / 60Hz Amplifier section  Clipping point of the preamplifier is set to a level where total harmonic distortion (THD) is 0.2% Input Impedance (Fixed) 330 kohm Output Impedance (20 Hz-20kHz) < 0,009 Ohm Frequency response (DC - 65 kHz) - 0.4 dB Input level for rated output 1 V RMS Max. peak current > 150 A THD(measured at 1 kHzhalf power,8W) < 0,001 % THD (measured at 1 kHz -1 dB, 8 W) < 0,0015 % Noise  (measured with bothinputsshorted) 400 Hz - 30 kHz : 150 µV DC - 30 kHz : 200 µV Damping factor (20 Hz - 20 kHz) > 850 Rated output power 8 ohms 600 W 4 ohms 1200 W Power consumption (no load or signal) 230 W The NEMO is DC coupled from input to output Dimensions  Width 465 mm / 18.3 inches Depth 514 mm / 20.2 inches Height 288 mm / 11.3 inches Weight 41 kg. / 90.2 lbs
 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                                                              

ELETTROCOMPANIET   ECM 2                                                             Listino  ufficiale  €.   6.350,00      

Media Center HDMI,   WIFI- USB

The ECM 2 combines a media player with the DAC from the ECD 2 in order to truly reproduce lossless and high-resolution digital content. The ECM 2 will let you listen to high-definition audio, watch video in full-HD, and decodes DTS-HD and Dolby TrueHD formats for optimal quality. The combination of bit-perfect audio streaming and the acclaimed ECD 2 let you enjoy your media collection like never before. The cutting edge digital audio and video electronics are combined with state of the art analog circuitry based on the design principles of Electrocompaniet. The result is an extremely low level of distortion, noise and jitter that will reproduce all your digital sources ultra-detailed and accurate, while still maintaining the warm and open Electrocompaniet sound. Choose your favourite devices to control the system. Experience the convenience of digital media by an intuitive and straight-forward interface. With all your music and movies at your fingertips, you can re-discover your collection.he system can be controlled by tablet, smartphone or via remote on the attached TV monitor /projector. The user interfaces are designed specifically to the various devices to offer the best possible experience while browsing, searching, and controlling the music and video. Simply download our free app or use any UPnP compatible app to control your system and browse through your collection. You can even use the ECM 2 as a stand-alone DAC. The inputs and volume can be accessed by the front panel, remote control or via your tablet or smartphone. Download remote control for: iOS app, Android app It doesn’t matter where or how you store your media. The ECM 2 will reproduce everything with true high-end quality.  The ECM 2 plays music, movies, and television shows from network attached storage, an usb disk or an internal drive. The internal drive is user-selectable. Insert a SSD for a vibrationless system, or a hard disk for storage density. If a hard disk is installed, it will automatically be turned off when not in use. Where ever you choose to put your media, the navigation will be instant and playback will be bit-perfect. ECM2-storages When connected to the internet, information and covers for music, movies and TV shows will automatically be retrieved to let you get the most out of your collection.  A high-end system for everyone  The ECM 2 excels in its role as a high-end media hub in your music system. Not only can it play your high-quality music and videos, it also lets you access YouTube, internet radio and Spotify. Stream lossless music directly from Tidal or Qobuz (including 24-bit hi-res). You can also push your music and movies directly from your mobile device to the ECM 2. All this makes this system ideal for both quality and casual listening.  Technical Data All measurements are made at 120V / 240V //50Hz / 60Hz No. of channels 2 Output Impedance 300 Ohms Noise floor (20 - 20 kHz) < -145 dB Frequency response 0.5 - 48 kHz THD+N < 0,0005 % Upsampling rate 192 kHz, 24 bit Digital/Analog conversion 192 kHz, 24 bit Input sampling rate:  2 x SPDIF Coax 192 kHz, 24 bit 2 x SPDIF TOSLink 192 kHz, 24 bit Network connection: Wi-Fi or LAN  Internal drive:  Docking, self installation. 3.5"/2.5" - unlimited capacity. Video:  1xHDMI Full HD 1080p Supported audio formats: All popular formats including: WAV/WAVE, MP3, AAC+, Vorbis, AC3, DTS, ALAC, FLAC, APE, AIFF, WMA, up to 192kHZ/24bit, DSD, up to DSD 128 (5.6 MHz) Supported video formats: All popular formats including: MPEG-2, MPEG-4, H.263, MPEG-4 AVC (H.264), up to 1080p with HD 192kHz/24bit audio Supported control interfaces: DLNA, UPnP, Android and iOS remoteInternal storage: docking, self installation Streaming services: • Spotify Connect• TIDAL• WiMP • Qobuz • Internet Radio Power consumption (no load or signal) 50 W standby 0.5 W Dimensions  Width 465 mm / 18.3 inches Depth 371 mm / 14.6 inches Height 78 mm / 3 inches Weight 8,5 kg. / 18 .7lbs. *(without internal drive)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it

 


                                          

ELETTROCOMPANIET   ECI-6DX                                          Listino  ufficiale  €.   7.450,00      

Integrato 125 Watt su 8 Ohm Streaming WI FI- DAC, (DSD All Format Compatible)

Balanced integrated amplifier with DAC and Next-gen streamer ECI-6DX-award-referenzklasseThe ECI 6DX combines a best-in-class feature set with cutting edge audio technology and true Electrocompaniet sound. This single unit is able to play whichever, wherever and whatever audio you might have, and makes it sound like music as it was meant to be. The built-in streamer is extremely powerful, flexible and easy to use. It can play directly from music services such as Tidal, Qobuz and Spotify, can be fed music through AirPlay or DLNA, and it can even index and play from your own music collection stored in your network. The powerful hardware ensures that all popular formats are supported (including DSD) and that continuous software upgrades can support the latest and greatest streaming services. The streamer shares the same DNA as the ECM 2 and the new EC Living product line. This means that you can use the same apps and interface, and play all of the same music on all units. This way, you don’t have to choose between high-end and multi-room, or flexibility and audio quality. All units are equally flexible, and will work equally well together. mac_iphone The ECI 6DX can be operated by the intuitive iOS & Android application, the universal webinterface, or with the straightforward IR remote control. All of our streamer systems use the same app and web-interface. All measurements are made at 120V / 240V //50Hz / 60Hz Digital section: D/A converter 24 bit/192 kHz Sample rate converter 24bit / 192kHz Inputs SPDIF, 2x Toslink, 1x USB USB: asynchronous up to 24bit/ 192kHz supported SPDIF: 24bit/ 192kHz Toslink: 24bit/ 96kHz Streamer section • Advanced 802.11 AC WiFi with MIMO • 1x Gigabit Ethernet (1000Mbps) • 1x USB for external storage • iOS, Android and web app Streaming services • Spotify Connect • TIDAL • WiMP • Qobuz • AirPlay • Internet Radio • DLNA as renderer Supported formats: • All popular formats including: WAV/WAVE, MP3, AAC+, Vorbis, AC3, DTS, ALAC, FLAC, APE, WMA, up to 192kHZ/24bit, DSD, up to DSD 128 (5.6 MHz) Preamplifier section  Input impedance ( Balanced input ) 47Kohm Maximum input level 10 Volt RMS Noise floor ( 1Vrms, 20 - 20 kHz, balanced) -135 dB THD + N (1Vrms, 20 - 20 kHz, balanced) <0.004%Gain (Balanced) 0 dB  Amplifier section  Output Impedance < 0,02 OhmFrequency response 1 – 150 kHz Channel separation > 120 dB THD ( 20 - 20 kHz) < 0.004% Maximum peak current >100A Damping factor 8 ohm load >350 I Input sensitivity 120W output 1.3Vrms Input sensitivity HT 120W output 1Vrms Gain HT Input x36 (31 dB) Rated output power  8 ohms 2 x 125 W 4 ohms 2 x 200 W 2 ohms 2 x 370 W Power consumption  110 W Standby 1W (no load or signal)  Dimensions  Width 465 mm / 18.3 inches Depth 405 mm / 16 inches Height 128 mm / 5 inches Weight 20Kg / 44 lbs.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                                  

ELETTROCOMPANIET   EC1 -UP MK4                                  Listino  ufficiale  €.   7.100,00      

. Lettore CD, Caricamento dal’alto, Reference  192/24 - Bilanciato

EMC 1 MKIV Reference CD player Since 1998, Electrocompaniet has produced one of the best sounding CD players on the market, the EMC 1-UP. The new EMC 1 MKIV builds upon this legacy, and refines by using a new drive unit. The player has a high performance sample rate converter, fully balanced D/A converters and discrete analog audio circuitry for excellent performance. It features an unique cancellation system which cancels acoustic / mechanical vibrations, preventing the laser pick-up from receiving unwanted and sonically degrading signals.The audio quality surpassed our own EMC 1 UP, arguably one of the best CD players on the market today. Product highlights: • No-compromise mechanical design with five different housings, which shield analogue, digital, transport, transformer and controller circuitry. • Electromechanical cancellation system which cancels acoustic-mechanical vibrations, preventing the laster pickup from receiving mechanical distortions. • Separate transformers and power supplies for analogue and digital circuits. • Fully balanced D/A converter with fully balanced discrete analog audio circuitry.• Digital outputs via S/PDIF and Toslink. •12V trigger input for remote power ON.• RS232 port for firmware upgrades and control through a wide range of home installation systems. • Soundcare superspikes for the best possible footing.Technical specifications Output level  (unbalanced) 2.3Vrms (balanced) 4.6Vrms Noise floor < -130dB Frequency deviation (20-20kHz) 0.05dB Channel separation > 110 dB THD+N <0.003% Dynamic range 120 dB Power consumption 25 W Power consumption Standby 0.5 W Compatible formats: CD, CD-R, CD-RW Digital outputs: SPDIF COAX, SPDIF TOSLINK Control inputs: RS232, 12V Trigger Other True balanced system Mechanical filter which cancels acoustic/mechanical vibrations preventing the laser pick-up from receiving unwanted signals Fully remote (no volume control) Dimensions  Width 482 mm / 18.9 inches Depth 422 mm / 16.6 inches Height 120 mm / 4.7 inches Weight 18 Kg / 39.6 lbs.

                  

ELETTROCOMPANIET   ECC1                    Listino  ufficiale  €.   3.300,00      

Budget high-end, con DAC 24 bit/192 kHz Cirrus Logic, piattaforma antivibrazioni per pick-up laser

Modern production technology has been utilized to keep the manufacturing cost at a minimum and give a performance that will rival the best. The latest 24bit/192kHz DAC from Cirrus Logic, together with a precision fully balanced analogue output stage operating in class A, sets the basis for a detailed, delicate and dynamic sound. A damping platform based on the EMC1 UP anti-vibration system has been developed to create the best possible working conditions for the laser pick-up. The ECC 1 features both balanced and single-ended outputs, and a coaxial digital output. The analogue output filter is optimized to reduce the phase shift at higher frequencies, thereby leaving the high frequency music information intact.Technical Data Conditions  No. of channels 2 Video No Output impedance 100 ohm Output level Unbalanced 2.3Vrms Output level Balanced 4.6Vrms Noise floor 20 - 20 kHz < - 130 dB Frequency deviation 20 - 20 kHz < 0.05 dB Channel separation > 110 dB  THD + N 20 - 20 kHz < 0.002% IMD TBD Digital/Analog Conversion 24 bit, 192 kHz Dynamic Range 120 dB Compatible formats CD-R, CD-RW, MP3-CD, CD, MP3-DVD, WMA-CD Dimensions W x D x H 483 x 385 x 75 mm Weight 9 kg Power consumption No load or signal 55 W Audio Outputs 1 x 2 ch balanced line out (XLR)1 x 2 ch unbalanced phono Digital Outputs 75 ohm S/PDIF RCA


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                         

ELETTROCOMPANIET   EMP -3                                                           Listino  ufficiale  €.   3.500,00      

Balanced Universal Player (stereo e multicanale) 4K Video up-scaling, HDMI input, Blu-ray 2D to 3D, DVD. CD, SACD, DVD Audio. Video processor Marvell Kyoto-G2H con l'ultima tecnologia Qdeo™. SACD stereo & multi con l'uso del formato DSD. Uscita bilanciata separata per riproduzione stereo. Formato PCM up-scaled a 192kHz/24 bit prima di essere inviato al DAC. Formato DSD diretto. risoluzione in uscita di tutte le sorgenti video 4K up-scaling (3840x2160). AUDIO: Dolby True HD, DTS-HD Master, 7.1 Chanel Analog Output, 2.0 channel balanced. VIDEO: True24pč, Blu-ray 2D/3D, Full HD 1080p, BD-Live (Profile 2.0). BonusVIEW, HDMI 1.4a 4K Up-scaling. MEDIA: CD, DVD, SACD, DVD-Audio, Blu-ray (2D e 3D) STREAMING: DLNA Certified, Ethernet/Wi-FiCONNECTIONS: Dua HDMI 1.4a, un HDMI Input, 2xUSB 2.0, RS232, Ethernet cablata e wireless, 7.1 ch audio, 2.0 ch. balanced. DAC: Electrocompaniet Facilities: USB e Wireless

The EMP 3 is a new balanced multiplayer from Electrocompaniet. A fully fledged and versatile multiplayer with support for all modern audio & video formats. New features to this model are a 4K video up-scaling, HDMI input and dual-core processor which gives a quick startup and fast disc loading speed.  With the 2D to 3D Conversion technology you can take your standard DVD, Blu-ray, and other video content to the next dimension by converting them into 3D with the simple press of a button.  The EMP 3 is a real multiplayer that works perfectly as a player in a multichannel set-up and as a two channel CD/SACD player. The EMP 3 offers both phono and XLR balances outputs – the way you would expect it from an Electrocompaniet product. Highlights: • The EMP 3 incorporates Marvell's Kyoto-G2H video processor with the latest generation Qdeo™ technology. Qdeo video processing delivers a truly immersive viewing experience by rendering quiet natural video free of noise and artifacts for all types of content. • SACD playback is possible in both stereo and multichannel – using DSD format. The DSD data-stream is sent directly from the disk to the DAC’s for direct transmission to analogue audio. Filters on the output removes high frequency noise and amplitude and phase characteristics of the signal is maintained. • A separate balanced stereo output offers high quality two-channel playback to you existing stereo set-up. PCM format is up scaled to the resolution of Full HD 1080p by up-scaling all video sources to 4K(3840 x 2160) output resolution.• Audio: Dolby True HD, DTS-HD Master, 7.1-Channel Analog Output, 2.0 chanel balanced.• Video: True24p Video, Blu-ray 2D/3D, Full HD 1080p, BD-Live (Profile 2.0), BonusVIEW, HDMI 1.4a, 4K Up-scaling• Media: CD, DVD, SACD, DVD-Audio, Blu-ray (2D and 3D)• Streaming: DLNA Certified, Ethernet / Wi-Fi • Connections: Dual HDMI 1.4a outputs, one HDMI input, 2x USB2.0, RS232 , Ethernet wired and wireless, 7.1ch audio, 2.0 ch balanced.Media support : BD-Video, Blu-ray 3D, DVD-Video, DVD-Audio, AVCHD, SACD, CD, HDCD, Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE Streaming: DLNA Certified, Ethernet/WiFi  Connections: Dual HDMI 1.4a, USB2.0, RS232 , Ethernet wired and wireless, 7.1ch audio, 2.0ch balanced Technical Data Conditions No. of channels 7.1ch single ended + 2ch balanced Video yes Output impedance 100 Ohm Output level Balanced, 0dBFs 2Vrms Single ended, 3Vrms Balanced Noise floor 20 - 20 kHz < - 130 dB Frequency deviation 20 - 20 kHz < 0.02 dB Channel separation > 110 dB THD + N 20 - 20 kHz < 0.004% IMD TBD Digital/Analog Conversion 24 bit, 192 kHz Dynamic Range 110dB single ended, 120 dB balanced Compatible formats CD, DVD, SACD, DVD-Audio, Blu-ray (2D and 3D), AVCHD, HDCD, Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE, BD-R/RE DL Dimensions W x D x H 466 x 316 x 93 mm / 18.3 x 12.4 x 3.6 inches Weight 10 kg / 22 lbs Power consumption No load or signal 35 W (0.5W Standby) Audio Outputs 1 x 2ch. balanced line out (XLR) 7.1ch single ended (RCA) Digital Outputs 2x HDMI 1x TosLink SPDIF 1x Coax SPDIF Digital Inputs HDMI Audio: up to 5.1ch/192kHz or 7.1ch/96kHz PCM, Dolby Digital, Dolby Digital Plus, DTS, AAC. HDMI Video480i/480p/576i/576p/720p/1080i/1080p/1080p24/1080p25/1080p30, 3D frame-packing 720p/1080p24 Video Outputs 2 x HDMI (480i/480p/576i/576p/720p/1080i/1080p/1080p24/1080p25/1080p30, 3D frame-packing 720p/1080p24


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


                 

ELETTROCOMPANIET   EC P2                                          Listino  ufficiale  €.   2.150,00      

The new Electrocompaniet ECP 2 Phono Preamplifier is designed according to guidelines seen in the phono preamplifier from Dynamic Precision. It incorporates state-of-the-art instrumentation operational amplifiers and like other Electrocompaniet products, it uses the highest quality of discrete components through the whole signal path, all DC coupled of course. The ECP 2 accommodates any imaginable pick-up and cable combination, thanks to it’s highly configurable input stage. User can select best suiting capacitive and resistive load configuration regarding to the pick-up cartridge used as source, no matter whether it is of an MM or MC type. Overall gain is also adjustable in 5 dB steps to accommodate different output level from different pick-ups. The ECP 2 follows strictly the standard RIAA playback equalization curve, having also steep low frequency roll-off to filter out unwanted signals originating for example from playing back warped records. Phono section  Gain @ 1 kHz RCA Adjustable 39,8 – 71,4 dB Gain @ 1 kHz XLR Adjustable 45,8 – 76,4 dB Resistance loading (RL) Adjustable 10 Ω – 47 kΩCapacitive loading (CL) Adjustable 0 – 350 pF Maximum output level: 17.5 V rms (+ 25 dB V) Overload margin > 31 dB @ 1 kHz Output impedance 100 Ω single-ended, 200 Ω balancedFrequency response 20 – 20 kHz +/- 0.2 dB RIAA Correction Accuracy  ± 0,1 dB Subsonic filter -3dB @ 11 Hz, 24 dB/octave Channel separation > 85 dB, 20 – 20 kHz THD + Noise < 0.003 % @ 1 kHz S/N-R 96 dB, 1 kHz, A-weighted, ref. 10 dB V output S/N-R 91 dB, 1 kHz, A-weighted, ref. 5 mV input S/N-R 67.4 dB, 1 kHz, A-weighted, ref. 500 μV input Dimensions  Width 465 mm / 18.3 inches Depth 371 mm / 14.6 inches Height 78 mm / 3 inches Weight 9 kg. / 19.8 lbs.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


ELETTROCOMPANIET   ECG 1                                                           Listino  ufficiale  €.   3.050,00      

ECG 1 Regulated belt drive turntable CHASSIS: The Electrocompaniet ECG-1 is a sandwich construction made out of three layers: acrylic and aluminum, benefiting from the internal dampening in the acrylic and the rigidity of the aluminum. This sandwich construction with its different materials increases the internal vibration dampening further, so the chassis will have no resonance problems. PLATTER: The ECG 1 is fitted with a platter made out of acrylic that is very similar to the vinyl material used in the record. The record is meant to be placed directly onto the platter, without the use of a platter mat. This ensures a “strong” coupling between the two parts, basically making the LP “a part of the platter”. The acrylic material in the platter has good internal dampening, so it won’t “ring” like a metal platter. MOTOR:The ECG-1 turntable is fitted with a 24 Volt AC synchronous motor that is perfectly controlled by a 2 phase low harmonic analogue sine wave controller. An AC motor is very precise and will follow the frequency of the motor controller, without the complications and over engineering necessary with a DC motor (and it’s steering). TONEARM: The Electrocompaniet ECG-1 turntable is fitted with the Jelco SA-750EB tone arm. It will handle phono cartridges weighing between 4 and 12 grams. Technical Data Turntable Operation:.......................................Manual Drive system:..................................Exterior (round) rubber belt drive Motor:............................................24 V AC synchronous motor Speeds:.........................................33 1/3 – 45 – 78 RPM Speed selection:.............................Fully regulated electronically Platter:..........................................12” / 2.8 kg (6.1 lbs) acrylic Tonearm  Operation:......................................ManualProfile:...........................................S – shapedHeadshell:.....................................(SME-mount) Efficient length:..............................258 mm Overhang:.....................................15.17 mmOffset angle:..................................21˚Tracking error - angle:.................... 1.75˚ - 1.25˚ Cartridge weight:............................4 - 12 gCartridge height:............................38 - 60 mm Moving mass:................................21 g ( cartridge screws (0,5 g)) Dimensions Width ..........................................465 mm / 18.3 inchesDepth ..........................................360 mm / 14.1 inches Height .........................................153mm / 6 inches Weight (Turntable with tonearm).....13 kg. / 28.6 lbs Motor.................................1,3 kg / 2.2 lbs

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietŕ e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it