


    
VPI
PLAYER
LISTINO UFFICIALE €. 2.400,00

Giradischi completo
di stadio phono, amplificatore per cuffia con volume regolabile, braccio da 9"
su cuscinetto Gimballed/Yoke e testina Ortofon 2M Red premontata.Trazione a
cinghia. VTA regolabile. Sistema di sospensione rigida su 4 coni. Piatto in
alluminio da 2cm di spessore. Chassis in MDF. Uscita con RCA. Velocità 33/45
giri. Disponibile in due finiture: Hard Rock Maple (acero) o Mocha Walnut
(noce). Dimensioni (lxpxa): 47x34x11cm. Peso: 5,9Kg.
The
VPI Player is the first all in one high-end entry level turntable. Complete with
a headphone amplifier, phonostage, and pre-mounted Ortofon 2M Red cartridge on a
9 inch Gimballed / Yoke bearing tonearm, it is the perfect solution to enjoying
your records! It also has standard RCA connections providing the ability to
connect to a standard amplifier and desktop/floor standing speakers. The Player
turntable is a precision instrument that has been thoroughly tested to create
the musical experience you're looking for! It is also now available in two
finishes: Hard Rock Maple and Mocha Walnut.

      
VPI
PRIME SCOUT
LISTINO UFFICIALE €. 2.900,00

Giradischi completo
di braccio JMW9 da 9" premontato. Trazione a cinghia. Unità motore separata.
Braccio unipivot. Sistema di sospensione rigida su 4 coni in alluminio
regolabili. Piatto in alluminio da 3cm di spessore su cuscinetto a bagno d'olio.
Chassis in MDF e acciaio con forma sagomata Prime. Delrin Clamp indotazione.
Velocità 33/45 giri. Finitura nera. Dimensioni (lxpxa): 48x36x20cm
Re-introducing
the audio world to the best-selling VPI table of all time! Better than the old
one, better than it should be at this price! The Scout was one of the world's
best-reviewed turntables! The evolution to the Prime Scout drives to push the
envelope a little further with a cleaner sense of build and branding. The Prime
Scout is simple to set-up, you can have the table up and running in just minutes!

     
VPI
PRIME
LISTINO UFFICIALE €. 5.500,00

Giradischi completo di braccio JWM10 3D da
10,5" premontato. Trazione a cinghia. Piatto in alluminio da 5cm di spessore e
10Kg di peso. Torretta di regolazione VTA/SRA. Chassis in MDF da 2,5cm
rinforzato con lamina in acciaio disaccopiata con silicone. Unità motore
separata in contenitore di acciaio/alluminio. Sistema di sospensione su 4 nuovi
piedini Delrin a cono, isolamento meccanicamente dallo chassis. HRX clamp.
Velocità 33/45 giri. Dimensioni (lxpxa): 53x40x25cm. Finitura nera.
For
the past 3 years, VPI has focused on new/entry level audiophiles and getting
them to embrace vinyl for the first time. With the Prime, we wanted to get back
to our roots and focus on the existing audience with a table that offers quality
hi-end sound and takes advantage of our improvements in technology. We believe
it is important to show the industry that we will still be making new turntable
and designs whether Harry is in the factory or poolside! The Prime is Mat
Weisfeld's first solo design on a table, with Harry's approval as well as input
from the rest of the VPI staff. The shape of the Prime is meant to have a
curvier and sexier look compared to the "classic" look of our tables over the
past 10 years, while at same time having the footprint to accommodate the space
needed for a 10 inch 3D arm.

    
VPI
PRIME SIGNATURE
LISTINO UFFICIALE €. 7.900,00

Giradischi completo
di braccio JMW10 3DR da 10,5" premontato. Trazione a cinghia. Piatto in
alluminio da 5cm di spessore e 10Kg di peso. Torretta di regolazioneVTA/SRA.
Chassis con struttura a sandwich MDF/Alluminio/MDF da 2,5cm. Unità motore
separata in contenitore di acciaio/alluminio. Sistema di sospensione su 4 nuovi
piedini in acciaio a cono con isolamento meccanico dallo chassis. Clamp in
acciaio. Cablaggio del braccio con cavi Nordost Reference. Velocità 33/45 giri.
Dimensioni (lxpxa): 53x40x25cm. Finitura laccata nera
The Prime Signature is the next step up from the Prime, which took the world by
storm 2 years ago during its initial release. It features an upgraded JMW 10-3D
Reference arm in a “metallic black” gloss finish with Nordost Reference wire.
The chassis consists of an aluminum plate sandwiched between a composite
material for improved damping. Due to the additional weight of the table, we
upgraded the feet to our Classic Signature feet. In addition, both the motor
housing and all Delrin posts and armboards were upgraded to a heftier stainless
steel.

   
VPI
AVENGER
LISTINO UFFICIALE €. 13.750,00

Giradischi completo di braccio JWM10 3D da 10,5"
premontato. Trazione a cinghia. Piatto in alluminio da 5cm di spessore e 10Kg di
peso. Chassis a tripla laminatura: acrilico/alluminio/acrilico. Sistema di
sospensione su 3 piedini di isolamento derivati da HR-X. Motore estremamente
preciso separato dallo chassis. HR-X clamp. Velocità 33/45 giri. Elegante
finitura laccata Nera.
The VPI Avenger table was originally a project started by Harry over 12 years
ago. In the process of the design the project was dropped in mid-production due
to excessive demand by HR-X customers which left the design and proto-type
chassis to be mothballed. The good news about the abandoned design is Harry
instead shifted his focus into starting and completing the VPI Classic Turntable.
Shortly after the development of the Prime, and while cleaning out the warehouse
in preparation for a dealer training event, the forgotten Avenger and its
designs were re-discovered! The working name was the "Tri-Pod Project". Being
newly motivated, Harry has finally put in motion the table that will be his
master piece! The unique iterations that had been crafted from the original
process were completed as Special Editions. The Table: The VPI Avenger chassis
is three layers of bonded acrylic/aluminum/acrylic, with damping material
between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the
massive bearing assembly. The corner posts which hold the tonearms (up to three
will fit) have adjustable machined knobs giving the user the ability to easily
raise and lower the height to level the table. Fully adjustable armboards are
made from 5/8” 6061 aluminum for rigidity and grounding. The table can mount up
to three arms, any manufacture's brand, and any length! The Table: • The Avenger
chassis is three layers of bonded acrylic/aluminum/acrylic with damping material
between layers. 3 stainless steel corner posts for both isolation and tonearm
mounting and for mechanical grounding (up to 3 will fit). • The 300 RPM, 24
pole, AC synchronous motor is capable of high torque and quiet operation. The
motor is installed in a separate aluminum and steel machined assembly • The
Inverted bearing features a hardened stainless steel shaft, 60 Rockwell chrome
hardened ball, spinning in a phosphor bronze bushing and sits on a PEEK thrust
disc. The belt side load is placed at the center of the spinning bearing for
zero teeter-totter effects • The 20 pound 6061 aluminum platter has an accuracy
of +/- .001” in a 39” circumference • The motor pulley has an accuracy of +/-
.0005” when leaving factory• JMW 12-3D with VPI pure copper wir Specifications:•
Wow and flutter: .03%• Speed Accuracy: .04%• Rumble: 82db down• Overall
Dimensions 27" x 23" x 10"• Footprint is 23" x 20"• 87 lbs packing weight
Available Upgrades:• Periphery Ring clamp for the ultimate in record warp
reduction• Analog Drive System (ADS) for the utmost accuracy in motor speed and
fine speed adjustments.• Avenger Rim-Drive• Avenger Reference Magnetic Drive •
Avenger Reference Feet• JMW-12-3DR • Additional JMW Tonearms • Additional Arm
boards for third party arms

VPI
AVENGER
PLUS
LISTINO UFFICIALE €. 20.500,00

Giradischi completo
di braccio JMW12 3DR da 12" premontato. Trazione a cinghia. Piatto in alluminio
da 5cm di spessore e 12Kg di peso. Chassis a tripla laminatura:
acrilico/alluminio/acrilico con smorzamento interno. Sistema di sospensione su 3
piedini di isolamento. Sistema di trazione con ADS esterno, regolazione della
velocità in modo accurato. HR-X clamp. Anello periferico in acciaio. Cablaggio
del braccio con cavi Nordost Reference. Velocità 33/45 giri. Elegante finitura
laccata Nera
With
the creation and introduction of the Avenger and Avenger reference we found
there was a large gap between the products in price range. To accommodate those
looking for a step up from the Avenger but not ready to take go all in for the
Avenger Reference, the Avenger Plus is exactly what it describes. An Avenger
“plus” some solid upgrades that make it a step up from the standard Avenger.
Using the technically from our behemoth Titan turntable, we have added the Harry
Weisfeld Signature Rim Drive motor assembly. With improved engineering to make
it easier to use than ever with an adjustable knob to move the rim drive
mechanism which is driven by the included Analog Drive System. Additionally the
tonearm is getting a step up with the JMW 12-3DR with Nordost Reference wire as
well as a periphery ring clamp. The VPI Avenger chassis is three layers of
bonded acrylic/aluminum/acrylic, with damping material between layers, locked in
by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly.
The corner posts which hold the tonearms (up to three will fit) have adjustable
machined knobs giving the user the ability to easily raise and lower the height
to level the table. Fully adjustable armboards are made from 5/5” 6061 aluminum
for rigidity and grounding. The table can mount up to three arms, any
manufacture's brand, and any length!The Table:• The Avenger chassis is three
layers of bonded acrylic/aluminum/acrylic with damping material between layers.•
3 stainless steel corner posts for both isolation and tonearm mounting and for
mechanical grounding (up to 3 will fit).• Analog Drive System (ADS) for the
utmost accuracy in motor speed and fine speed adjustments.• Periphery Ring clamp
for the ultimate in record warp reduction• The 300 RPM, 24 pole, AC synchronous
motor in machined aluminum Rim Drive Motor assembly.• The Inverted bearing
features a hardened stainless steel shaft, 60 Rockwell chrome hardened ball,
spinning in a phosphor bronze bushing, and sits on a PEEK thrust disc. The belt
side load is placed at the center of the spinning bearing for zero teeter-totter
effects• The 20 pound 6061 aluminum platter has an accuracy of +/- .001” in a
39” circumference• The motor pulley has an accuracy of +/- .0005” when leaving
factory• JMW 12-3DR with Nordost Reference wireSpecifications:• Wow and flutter:
.03%• Speed Accuracy: .04%• Rumble: 82db down• Overall Dimensions 27" x 23" x
13"• Footprint is 23" x 20"• 100 lbs packing weight

VPI
AVENGER REFERENCE
LISTINO UFFICIALE €. 29.000,00

Giradischi completo di braccio JWM12 3D Reference da
12" premontato. Trazione a cinghia. Piatto in alluminio da 6cm di spessore e
15Kg di peso con disaccoppiamento magnetico. Chassis a tripla laminatura:
acrilico/alluminio/acrilico. Sistema di sospensione su 3 piedini di isolamento
nuovi Avenger. Possibilità di montare 3 bracci. Motore 300rpm estremamente
preciso separato dallo chassis. SDS. HR-X clamp e Periphery Ring Clamp. Velocità
33/45 giri. Elegante finitura laccata Nera.
The
final and polished for of the VPI Avenger Reference. This model went through an
evolution with the creation of our top of the line Titan turntable in using the
same concept of the rim drive motor assembly driving the magnetic platter. The
magnets are machined into the platter at the center and do not interfere with
the owner’s cartridge. Our methodology is the ultimate vibration filter for an
high-end system. The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic,
with damping material between layers, locked in by 3 isolation steel corner
posts, 3 bolts, and the massive bearing assembly. The corner posts which hold
the tonearms (up to three will fit) have adjustable machined knobs giving the
user the ability to easily raise and lower the height to level the table. The
corner posts connect to the cone stabilizers which sit in a machined Delrin/ball
bearing isolation base reminiscent of the same used on the Prime turntable.
Fully adjustable armboards are made from 5/5” 6061 aluminum for rigidity and
grounding. The table can mount up to three arms, any manufacture's brand, and
any length!The Table:• The Avenger chassis is three layers of bonded acrylic/aluminum/acrylic
with damping material between layers.• 3 stainless steel corner posts for both
isolation and tonearm mounting and for mechanical grounding (up to 3 will fit).•
Analog Drive System (ADS) for the utmost accuracy in motor speed and fine speed
adjustments.• Periphery Ring clamp for the ultimate in record warp reduction•
The 300 RPM, 24 pole, AC synchronous motor in machined aluminum Rim Drive Motor
assembly.• The Inverted bearing features a hardened stainless steel shaft, 60
Rockwell chrome hardened ball, spinning in a phosphor bronze bushing, and sits
on a PEEK thrust disc. The belt side load is placed at the center of the
spinning bearing for zero teeter-totter effects• The 25 pound 6061 aluminum
magnetic drive platter has an accuracy of +/- .001” in a 39” circumference• The
motor pulley has an accuracy of +/- .0005” when leaving factory• JMW 12-3DR with
Nordost Reference wire• Avenger Reference Feet – Machined aluminum, knurled
cones set in a machined Delrin isolation pad that sites in a machined aluminum
isolation pad for top of the line isolation and noise
cancellation.Specifications:• Wow and flutter: .03%• Speed Accuracy: .04%•
Rumble: 82db down• Overall Dimensions 27" x 23" x 13"• Footprint is 23" x 20"•
110 lbs packing weight Available Upgrades:• Additional JMW Tonearms• Additional
Arm boards for third party arms• Pneumatic Air Suspension feet

VPI
HR-X/JWM12
3D
LISTINO UFFICIALE €. 18.700,00

Giradischi completo di braccio JWM12" 3D.
Trazione a cinghia. Unità motore separata. Flywheel con doppio motore a 24 poli
e SDS. Chassis a tripla laminatura: acrilico/alluminio/acrilico. Sistema di
sospensione su 4 piedini HRX. Piatto in acrilico. Velocità 33/45 giri. Arm mount
intercambiabile.Sistema di sospensione ad aria. Record clamp periferico e
centrale in dotazione. Finitura laccata in acrilico nero. Dimensioni (lxpxa):
64,7x49,5x25,4cm. N.B. Questo giradischi è disponibile solo su ordinazione con
un tempo di consegna di circa 90 giorni
Versione con braccio JWM12" 3D
REFERENCE 19.900,00

VPI
TITAN
M
LISTINO UFFICIALE €. 55.000,00

Giradischi completo
di braccio JMW12 3DR da 12" premontato. Struttura dello chassis a doppio stack.
Trazione a cinghia. Piatto in alluminio da 5cm di spessore e 14Kg di peso con
disaccoppiamento magnetico. Doppio chassis a tripla
laminatura:acrilico/alluminio/acrilico con smorzamento interno. Sistema di
sospensione pneumatica ad aria dei 3 piedini di isolamento. Sistema di trazione
con ADS esterno,regolazione della velocità in modo accurato. HR-X clamp. Anello
periferico in acciaio. Cablaggio del braccio con cavi Nordost Reference.
Velocità 33/45 giri. Elegante finitura laccata Nera
Building on the legacy of the Avenger turntable, the Titan is designed to handle
up to three tonearms of any make or length. Utilizing a machined acrylic/aluminum/acrylic
sandwich-design chassis on top of our pneumatic air-suspension isolation footers,
the Titan is set to be the most stable, and isolation-oriented turntable in the
VPI quiver of decks. A further new design feature on the Titan is the
implementation of analog-based oscillators to generate low-distortion analog
sine waves for its 33/45-rpm motor assembly. According to VPI, using a
regenerated AC-sine wave virtually eliminates any power line-associated noise
from entering the electronic signal path. This provides pure, smooth AC power to
the turntable motor


VPI
JWM
9
€. 1.700,00

Braccio dritto da
9" con shell integrato, sistema unipivot. Solo canna, necessita di base
VTA per il montaggio
OPTINAL Base VTA 9" Base per braccio da 10". Regolazione altezza e VTA. Uscita
RCA + 800,00

VPI
JWM
9 3D
€. 3.000,00

Braccio dritto da
9" con shell integrato. Tecnologia di stampa 3D. Composto plastica/resina
ultraleggero e indistruttibile. Ogni braccio richiede 24 ore di stampa 3D.
Sistema unipivot. Solo canna, necessita di base VTA per il montaggio
OPTINAL Base VTA 9" Base per braccio da 10". Regolazione altezza e VTA. Uscita
RCA + 800,00

VPI
JWM 10
€. 1.700,00

Braccio dritto da 10" con shell integrato,
sistema unipivot. Solo canna, necessita di base VTA per il montaggio..
OPTINAL Base VTA 10" Base per braccio da 10". Regolazione altezza e VTA. Uscita
RCA + 1.950,00

VPI
JWM 103D
€. 3.000,00

Braccio dritto da 10" con shell
integrato. Tecnologia di stampa 3D. Composto plastica/resina ultraleggero e
indistruttibile. Ogni braccio richiede 24 ore di stampa 3D. Sistema unipivot.
Solo canna, necessita di base VTA per il montaggio
OPTINAL Base VTA 10" Base per braccio da 10". Regolazione altezza e VTA. Uscita
RCA + 1.950,00

VPI
JWM 10REFERENCE
€. 3.900,00

Braccio dritto da
10" con shell integrato. Tecnologia di stampa 3D. Composto plastica/resina
ultraleggero e indistruttibile. Ogni braccio richiede 24 ore di stampa 3D.
Sistema unipivot. Cablaggio Nordost Reference. Solo canna, necessita di base
VTA per il montaggio
OPTINAL Base VTA 10" Base per braccio da 10". Regolazione altezza e VTA. Uscita
RCA + 1.950,00

VPI
JWM 12
€. 3.000,00

Braccio dritto da
12" con shell integrato, sistema unipivot. Solo canna, necessita di base VTA per
il montaggio OPTINAL
Base VTA 12" Base per braccio da 10". Regolazione altezza e VTA. Uscita RCA +
2.500,00

VPI
JWM 123D
€. 4.400,00

Braccio dritto da 12" con shell integrato.
Tecnologia di stampa 3D. Composto plastica/resina ultraleggero e
indistruttibile. Ogni braccio richiede 24 ore di stampa 3D. Sistema unipivot.
Solo canna, necessita di base VTA per il montaggio.OPTINAL
Base VTA 12" Base per braccio da 10". Regolazione altezza e VTA. Uscita RCA +
2.500,00

VPI
JWM 123DR
€. 5.700,00

Braccio dritto da 12" con shell integrato.
Nuova tecnologia di stampa 3D intrecciata. Composto plastica/resina ultraleggero
e indistruttibile. Ogni braccio richiede 24 ore di stampa 3D. Sistema unipivot.
Cablaggio Nordost Reference. Finitura in carbonio. Solo canna, necessita di base
VTA per il montaggio.OPTINAL Base VTA 12"
Base per braccio da 10". Regolazione altezza e VTA. Uscita RCA + 2.500,00


VPI
HW-16.5
LISTINO UFFICIALE €. 1.100,00

Macchina lavadischi semi automatica, spazzola per I'applicazione
del liquido in dotazione, asciugatura automatica, peso 13kg., finitura legno
nero. Dimensioni (lxpxa): 40x23x40cm

VPI
MW-1
CICLONE
LISTINO UFFICIALE €. 1.900,00

Macchina lavadischi semi automatica, spazzola per I'applicazione
del liquido in dotazione, motore reversibile, asciugatura automatica, chassis in
alluminio, peso 12,7 kg., finitura legno nero


VPI
RCM
LISTINO UFFICIALE €.
25,00

RCM FLUID Flacone di liquido pulisci dischi da 235ml.
Cad
VPI
ADS
LISTINO UFFICIALE €.
1.600,00

Analog Drive System. Controllo esterno del
motore. 33/45rpm. Dimensioni (lxpxa): 40,6x30,4x7,6cm
VPI
ARM
MOUNT AVENGER x VPI
LISTINO UFFICIALE €.
800,00

Basetta in alluminio preforata per il
montaggio di bracci VPI
VPI
ARM
MOUNT AVENGER x other
LISTINO UFFICIALE €. 1.600,00

Basetta in alluminio preforata per il
montaggio di bracci non VPI

Legenda istruzioni
Clicca
per qui per vedere : FOTO PRODOTTO
Clicca
per qui per vedere : ISTRUZIONI PRODOTTO
Clicca
per qui per vedere : CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO
Nota
bene *
Per ordinare o avere
gli ultimi prezzi aggiornati telefona al
0174 670100
o invia un E-mail a
info@newaudio.it
*I prezzi indicati
sono di listino ufficiale delle case produttrici ,nel
caso di diffusori si riferisce al prezzo del
singolo diffusore per offerte ed eventuali
promozioni telefonare o inviare e-mail.
*Il
presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i
prezzi indicati possono variare senza preavviso telefonare o inviare un
e-mail per ulteriori domande e conferme sui prezzi sopra riportati.
*Tutti i marchi citati nel presente listino sono di proprietà e
registrati alle rispettive Case Produttrici
*Prezzi
franco
nostro magazzino

|