HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 

 

Plinius č sempre stato sinonimo di grande valore e alte prestazioni, ma questo amplificatore si trova in una categoria completamente diversa. L’SA Reference a stato solido di classe A possiede un calore tonale speciale, combinato con una enorme resa dei bassi, ti fa pensare se le valvole siano davvero necessarie

Welcome to Plinius Audio where quality reproduction of music is at the heart of everything we do Listening to High Fidelity reproduction of music can give you a lift or soothe and relax you depending on your needs. Can you afford to miss out on this experience by listening to your favourite music on anything but the best system? We don't think you should have to and Plinius solutions get you into true High Fidelity listening. Take a look at the beautifully crafted music systems illustrated on these pages and when you have selected one that looks right for you contact us or find a dealer near you and ask for a demonstration of a Plinius system that suits your listening style. Once you have experienced our sound you'll never go back.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


PLINIUS INSPIRE 980                                                                                                                       Offerta   €.  3.990,00


INSPIRE 980– Amplificatore Integrato Stereo  Caratteristiche: Ingreessi Digitali: USB, TOSLINK Connettivitŕ: 10/100 Ethernet, WIFI DAC: 192/24 Camando Remoto/ UPnP Smartphone, Ipad/IPOD/Iphone Potenza: 80 Watts RMS per canale su 8 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 40A. Protetto da Fusibile Hum & Noise: 90dB below rated output 20 Hz to 20 kHz Guadagno: Linea 40dB, Phono 66dB (HG), 60(LG) Impedenza di Ingresso: 47Kohms Sovraccarico di Ingresso: 5V RMS Livello uscita Pre: 1,5V RMS , 47Kohms Impedenza uscita Pre: 1,5 Kohms Carico Raccomandato Pre: 47 K Ohms Dimensioni: 120mm x 450mm x 400mm Peso: 14kg Con Telecomando
Inspire 880 Integrated Amplifier  This versatile 80 watt per channel integrated amplifier goes a step further than traditional integrated products and gives you enhanced listening from almost any source. The Inspire 880 will accept signals from your CD player, your personal computer, your AV source and even vinyl from your turntable. Not only that but you get this versatility with a product that looks as stunning as it sounds. The aesthetic designs of the new Inspire range introduce new tones and textures to the finishes available in the Plinius range. To listen to stored digital files all you need do is connect your music collection to your Inspire 880 via the USB input. You then use your media player to select what you want to play and stream it to your Inspire 880 which converts the digital signal to the analogue signal your speakers need. In no time at all you can be up and running with Plinius clarity refinement and power. The Inspire 880 is a great way to bring your listening experience, from almost any source, into the world of real high fidelity.POWER 80 watts RMS per channel into 8 ohms.  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion DAC CAPABILITY 24 bit, 192ks/s CONNECTIVITY USB asynchronous Optical ToslinkFREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  -3dB at 5Hz and -3dB at 300kHz DISTORTION Typically <0.05% THD at rated power  0.2% THD and IM worst case prior to clipping CURRENT OUTPUT 16A short duration peak per channel  Fuse protected HUM & NOISE 90dB below rated output 20Hz to 20kHz unweighted INPUT IMPEDENCE 10k ohms for line inputs GAIN Line inputs to speaker out: 38dB  Phono Input to speaker out: 50dB POWER/CURRENT CONSUMPTION 300W  Class AB Idle 0.14A (32W) Standby DIMENSIONS Height: 72mm (3") Width: 450mm (17.75") Depth: 350mm (13.75") Weight: 10kg (22lb)

PLINIUS HAUTONGA                                                                                                                             Offerta   €. 5.100,00



 – Amplificatore Integrato Stereo  Caratteristiche:  Potenza: 200 Watts RMS per canale su 8 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 40A. Protetto da Fusibile Hum & Noise: 90dB below rated output 20 Hz to 20 kHz Guadagno: Linea 40dB, Phono 66dB (HG), 60(LG) Impedenza di Ingresso: 47Kohms Sovraccarico di Ingresso: 5V RMS Livello uscita Pre: 1,5V RMS , 47Kohms Impedenza uscita Pre: 1,5 Kohms Carico Raccomandato Pre: 47 K Ohms Dimensioni: 120mm x 450mm x 400mm Peso: 14kg Con Telecomando

Hautonga Integrated Amplifier The versatile Hautonga is a perfectly equipped and well balanced piece that derives from preceding development in earlier Plinius integrated amplifiers. The aesthetic is the distinctive Plinius rounded front and it is available in silver or black linished anodised finish. The rear panel has five line level RCA inputs with Phono RCA and a balanced XLR pair additional as standard. There is a Pre Out for those that only want to use the pre-amp stage and the Line Out connection for archiving or other ancillary equipment. Trigger in and out connectors provide for multi-room or home theatre simplicity. A full function remote lets you scroll through inputs from your seat. HT Bypass, standby mode for true low power operation that keeps the circuit active to deliver peak performance with minimal delay, mute and volume controls, display brightness adjustment and the full complement of CD player functions are all available from the remote. Careful attention has been paid to signals and circuit layout with short signal paths, optimal component placement and wiring specification working in harmony to extract exciting depth and detail from any musical recording. Taking integrated refinement to a new level, the Hautonga is an amplifier that has set new standards for performance, ease of use and reliability.POWER 200 watts RMS per channel into 8 ohms.  280 watts RMS per channel into 4 ohms.  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  -3dB at 5Hz and -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.2% THD and IM worst case prior to clipping CURRENT OUTPUT 40A short duration peak per channel  Fuse protected SLEW RATE  50V/µs HUM & NOISE 90dB below rated output 20Hz to 20kHz unweighted INPUT IMPEDENCE 47k ohms all inputs  Phono adjustable to 47k ohms, 470 ohms,  100 ohms,47 ohms, 22 ohms RATED PRE OUT LEVEL 1.5V RMS into 47k ohms or higher PRE OUT SOURCE IMPEDENCE Typically 1.5k ohms PRE OUT MINIMUM RECOMMENDED LOAD 47k ohms LINE OUT LEVEL 190mV at 200 ohms GAIN Line inputs to speaker out: 40dB  Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain POWER/CURRENT CONSUMPTION 600W  0.4A (92W)  Class AB Idle 0.14A (32W) Standby DIMENSIONS Height: 120mm (4 3/4") Width: 450mm (17 3/4") Depth: 400mm (15 3/4") Weight: 14kg (30lb)

PLINIUS  HYATO                                                                                                                                         Offerta   €. 8.600,00


Integrato Stereo  Caratteristiche: Ingressi: 32dB (RCA), 38(XLR) Potenza: 300 Watts RMS per canale su 8 Ohm, 600 Watts su 4 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 50A. Protetto da Fusibile Hum & Noise: 90dB below rated output 20 Hz to 20 kHz Impedenza di Ingresso: 47Kohms Dimensioni: 170mm x 450mm x 453mm Peso: 28 kg Scheda Phono MM/MC Con guadagno e carico selezionabile 1500 euro Prezzo: 14.500 Euro

Hiato Integrated Amplifier With 300 watts per channel the Hiato integrated stereo amplifier is a serious piece of equipment capable of driving big, difficult to drive speakers. It masters complex musical pieces that many dedicated power amps struggle with to give you spine tingling detail in the treble and control over the bass and mid range that is a pure delight. If you are looking for an integrated amplifier solution in your music system but you don't want to sacrifice the benefits that true, well controlled power can bring then this amplifier is for you. The rear panel layout includes four line level inputs and a user adjustable phono input. High quality WBT RCA connectors are used on all line level and phono inputs with additional balanced XLR inputs for CD and Line 1. It has RCA and XLR HT bypass input, remote IR input and 12V input/output triggers. There are four pairs of output connectors allowing bi-wired speaker applications, line level output for archiving and pre-out for bi-amping. The phono stage is optional. On the front panel a small, unobtrusive 3.5mm jack allows a casual user to connect portable media, and the Hiato's full function remote control also operates the Plinius CD players POWER 300 watts RMS per channel into 8 ohms  450 watts RMS per channel into 4 ohms  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.1% THD and IM worst case prior to clipping CURRENT OUTPUT 50A short duration peak per channel  Fuse protected SLEW RATE Typically 5µs HUM & NOISE 90dB below rated ouput 20Hz to 20kHz unweightedPOWER/CURRENT CONSUMPTION  800W  0.6A (138W) Class AB Idle  0.3A (69W) Standby OPTIONAL PHONO INPUT RCA UnbalancedINPUT CAPACITANCE 100pF ADJUSTABLE GAIN 50dB, 56dB, 60dB, 66dBADJUSTABLE LOAD 47k ohms, 470 ohms, 100 ohms, 47 ohms, 22 ohms DIMENSIONS Height: 170mm (7 1/2")Width: 450mm (17 3/4")Depth: 455mm (17 3/4")Weight: 25kg (56lb)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


PLINIUS KAITAKI                                                                                                                                       Offerta   €. 4.450,00


KAITAKI - Preamplificatore Caratteristiche:  Ingressi/Uscite: XLR, RCA Con HT Bypass Risposta in Frequenza: 20Hz to 20kHz ±0.2dB Distorsione: <0.05% THD at rated input level Hum & Noise: -80dB at rated input level, A Weighted Livello Massimo di Uscita: 125mV RMS into 10kohms or higher Impedenza di uscita: Typically 100ohms Dimensioni: 90mm x 450mm x 400mm Peso: 5,5kg Con Telecomando

Kaitaki Preamplifier  While the Kaitaki preamplifier mates aesthetically and musically with the Plinius P10 power amplifier this exciting preamplifier is the perfect partner for the Plinius SA103 power amplifier used either as a stereo amplifier or in a monoblock configuration.
Visible controls on the Kaitaki are the rotary volume knob and source selection buttons with all other functions driven from the distinctive Plinius remote control. LED indicators on the front panel display demonstrate the source selected and status of the mute, phase and HT bypass functions. The Kaitaki will allow the connection of up to 5 source components including both balanced and single ended connection for CD. A processor loop allows integration with a home theatre system and output is available from RCA or XLR connectors. The optional adjustable phono stage model allows enjoyment of vinyl at a sophisticated level without the need to purchase a specialised phono preamplifier. The electronics topography is derived in part from development work done on circuits for our later generation integrated amplifiers and source components, and a power supply with extremely low impedance allows the audio circuitry to deliver its best.



PLINIUS RM10                                                                                                                                           Offerta   €. 11.500,00

RM 10-PreamplificatoreCaratteristiche: Ingressi/Uscite:3 XLR, 6 RCACon HT BypassRisposta in Frequenza:20Hz to 20kHz ±0.2dBDistorsione:<0.05% THD at rated input levelHum & Noise:-80dB at rated input level, A WeightedLivello Massimo di Uscita:125mV RMS into 10kohms or higherImpedenza di uscita:Typically 100ohmsPeso: 15,5kgCon Telecomando

Reference M-10 PreampliferThe Reference M-10 is an entirely new, fully discrete, dual mono preamplifier, designed from the ground up. It is the culmination of decades of experience and the constant pursuit of excellence in electronic design.
The Reference M-10 is testament to Plinius’ relentless quest to produce a preamplifier that reveals extraordinary audio detail. At this crucial beginning of the signals journey low value, audio grade resistors are used to minimise noise and, when combined with the adjustable gain feature result in sound without distortion or unnecessary colour, this is pure, powerful sound. Plinius’ signature aesthetic is still ever present in the external styling of both the dual mono preamplifier and it’s remote. As always, form follows function resulting in the ultimate in design sophistication. Lovers of high-end audio reproduction will be impressed with the Reference M-10’s uninhibited ability to supply pure detail to the matching Reference A-300 power amplifier. We believe the Reference M-10 can hold its head up amongst the world’s best performing preamplifiers
CONNECTIVITY 2 x Trigger Out, 1 x Trigger In, 1 x RC5 In FREQUENCY RESPONSE 20Hz to 20kHz +/–0.1dB DISTORTION <0.001% THD+N INPUT 3 x XLR/RCA selectable, 3 x dedicated RCA, 1 x HT Bypass XLR/RCA selectable INPUT IMPEDENCE 7.5k ohms RCA/Unbalanced, 47k ohms XLR/Balanced PRE OUT SOURCE IMPEDENCE 10 ohms RCA/Unbalanced, 20 ohms XLR/Balanced OUTPUTS 2 x XLR/RCA Pre-Out, 1 x RCA Line OutMAXIUM OUTPUT LEVEL 7V RMS RCA/Unbalanced, 14V RMS XLR/Balanced GAIN High: 12dB (4x) Low: 0dB (1x)DIMENSIONS Height: 170mm (6.75") Width: 510mm 20") Depth: 480mm (19") Weight: 16kg (35lbs)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


PLINIUS P10                                                                                                                                                    Offerta    €. 4.150,00



P10 – Finale Stereo  Caratteristiche: Ingressi: 32dB (RCA), 38(XLR) Potenza: 200 Watts RMS per canale su 8 Ohm, 300 Watts su 4 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 40A. Protetto da Fusibile Hum & Noise: 90dB below rated output 20 Hz to 20 kHz Impedenza di Ingresso: 47Kohms Dimensioni: 120mm x 450mm x 400mm Peso: 14kg

P10 Power Amplifier The P10 has a level of sophistication rarely found in such a cost effective product. This amplifier has separate input and driver stage power supply regulation and it is an amplifier capable of true high-end performance. The large toroidal transformer will allow the P10 to deliver power levels in excess of 200 watts per channel into 8 Ohms. Difficult speaker loads are driven with ease to the most satisfying levels, while maintaining control and finesse. Partnered with the Plinius Kaitaki preamplifier these stable mates will combine to perform at the highest level. The P10 is also highly suited to multiple custom installation use featuring a Home Theatre trigger bypass.POWER 200 watts RMS per channel into 8 ohms.  300 watts RMS per channel into 4 ohms.  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz +/–2dB  -3dB at 5Hz and –3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.2% THD and IM worst case prior to clipping CURRENT OUTPUT 40A short duration peak per channelFuse protected SLEW RATE 50V/µs HUM & NOISE 90dB below rated output 20Hz to 20kHz unweighted INPUT IMPEDENCE 47k ohms GAIN RCA Inputs: 32dB XLR Inputs: 38dB POWER/CURRENT CONSUMPTION 600W  0.4A (92W)  Class AB Idle  0.14A (32W) Standby DIMENSIONS  Height: 120mm (4 3/4”) Width: 450mm (17 3/4”) Depth: 400mm (15 3/4”) Weight: 14kg (30lbs


PLINIUS SA103                                                                                                                                               Offerta  €. 7.990,00



 Finale Stereo – in Classe A pura  Caratteristiche:  Ingressi: 32dB (RCA), 38(XLR) Potenza: 125 Watts RMS per canale su 8 Ohm, 400 Watts in mono Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 50A. Protetto da Fusibile Rise Time: <5uS Hum & Noise: 100dB below rated output 20 Hz to 20 kHz A weighted Impedenza di Ingresso: 47Kohms Dimensioni: 220mm x 500mm x 455mm Peso: 38kg

SA 103 Power Amplifier The PLINIUS SA-103 stereo amplifier is a Class A amplifier capable of delivering up to 125 watts per channel in both Class A and Class AB mode. Bridged Mono RCA and Balanced Mono XLR circuits used in the SA103 allow Monoblock operation delivering in excess of 400 watts. This amplifier gets you into serious listening without breaking the bank. The SA103 are often sold as monoblocks and if you want to do that, and you have time to organise it, the factory can ensure they are made consecutively. Plinius' distinctive heatsink profile has allowed us to maintain the classic look and produce an amplifier capable of operating in Class A without the use of troublesome fans or other methods used for cooling. Its 500mm by 455mm footprint belies the power it produces and these units sit comfortably beside big speakers, understating somewhat their contribution to the speakers' performance. As with all Plinius amplifiers, premium components have been used throughout. There is the addition of a 12 Volt trigger which will allow integration into a semi automated system. These units are at the top of the Plinius range, sitting right under the SA Reference amplifier. With responsiveness and control they faithfully support your speakers as they seek to replicate the original artists' efforts for your listening ple POWER 125 watts RMS per channel into 8 ohms  220 watts RMS per channel into 4 ohms  Both channels driven from 20Hz to 20kHz at less than 0.05% total harmonic MONO OUTPUT 400 watts RMS into 8 ohms  730 watts RMS into 4 ohms  20Hz to 20kHz FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  0dB at 1Hz and -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.1% THD and IM worst case prior to clipping CURRENT OUTPUT 50A short duration peak per channel  Fuse protected RISE TIME Typically 5µs HUM & NOISE 100dB below rated output 20Hz to 20kHz, A-weighted INPUT IMPEDENCE 47k ohms GAIN RCA Inputs: 32dB  Balanced Inputs: 38dB POWER/CURRENT CONSUMPTION 700W  2.1A (485W) Class A Idle  0.4A (92W) Class AB Idle/Standby DIMENSIONS Height: 220mm (8 3/4 ") Width: 500mm (19 3/4") Depth: 455mm (18") Weight: 38kg (83lb)

 

PLINIUS SB301  MK2                                                                                                                                     Offerta  €. 9.990,00



SB301 MK2 – Finale Stereo  Caratteristiche: Ingressi: 32dB (RCA), 38(XLR) Potenza: 310 Watts RMS per canale su 8 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 100A. Protetto da Fusibile Rise Time: <5uS Hum & Noise: 100dB below rated output 20 Hz to 20 kHz A weighted Impedenza di Ingresso: 47Kohms Dimensioni: 220mm x 500mm x 455mm Peso: 38kg

SB 301 Power Amplifier For the technically minded the SB-301 is a Class AB two channel amplifier that delivers over 300 watts per channel at 8 ohms. For the not so technically minded that means it's a really good stable amplifier unit when the speakers demand a lot of power to drive bass without distortion or treble with detail and finesse and it will cope with inefficient speakers. The standing temperature is lower than that encountered in Class A series designs because it's a Class AB design. It occupies a niche in audio systems for the person that really loves big dynamic sound like movies, orchestral pieces and of course playing music loud!The physical construction of the SB-301 is based on the SA series designs so it has the same distinctive aesthetic as the Class A products and indeed much of the electronics topology is derived from that Class A history This amplifier delivers all the dynamics, finesse and transparency that Plinius is renowned for. Like all Plinius products it is very reliable and will rise to the challenge of difficult operating conditions time and time again.POWER 310 watts RMS per channel into 8 ohms.  470 watts RMS per channel into 4 ohms.  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.1% THD and IM worst case prior to clipping CURRENT OUTPUT 100A short duration peak per channel  Fuse protected RISE TIME Typically 5µs  PHASE RESPONSE +0° at 20Hz and -14° 20kHz HUM & NOISE 100dB below rated output 20Hz to 20kHz, A-weighted INPUT IMPEDENCE 47k ohmsGAIN RCA Inputs: 32dB  Balanced Inputs: 38dBPOWER/CURRENT CONSUMPTION 900W 1.6A (370W) Class AB Idle  0.2A (46W) Standby DIMENSIONS Height: 220mm (8 3/4 ") Width: 500mm (19 3/4") Depth: 455mm (18") Weight: 38kg (83lb)



PLINIUS KIOKO                                                                                                                                             Offerta  €. 7.200,00


KIOKO – Finale Stereo MK2  Caratteristiche: Ingressi: 32dB (RCA), 38(XLR) Potenza: 310 Watts RMS per canale su 8 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 100A. Protetto da Fusibile Rise Time: <5uS Hum & Noise: 100dB below rated output 20 Hz to 20 kHz A weighted Impedenza di Ingresso: 47Kohms Dimensioni: 212mm x 398mm x 420mm Peso: 30kg

Kiokio Power Amplifier Designed for 19U rack installation the KioKio was developed for the professional audio sector. Home Theatre installers had been using our SB301 and in their words found it 'bullet proof'; used in demonstrations it had been trucked around the USA and while the outside was battered by less than gentle handling the electronics just refused to give up. So much of the movie experience is the audible part of the show and amplifiers used in dedicated home theatre installations cannot give up. Reliability is the key for professional installers that have to service their installations so this unit meets their needs wonderfully. Of course it's a Plinius product so it looks good too and sometimes it's a shame to see it hidden in a rack. Its modern slim line design graces any audio system cabinet when used for dedicated two channel audio.OWER 310 watts RMS per channel into 8 ohms.  470 watts RMS per channel into 4 ohms.  Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion FREQUENCY RESPONSE 20Hz to 20kHz ±0.2dB  -3dB at 70kHz DISTORTION Typically <0.05% THD at rated power  0.1% THD and IM worst case prior to clipping CURRENT OUTPUT 100A short duration peak per channel Fuse protected RISE TIME Typically 5µs PHASE RESPONSE +0° at 20Hz and -14° 20kHz HUM & NOISE 100dB below rated output 20Hz to 20kHz, A-weighted INPUT IMPEDENCE 47k ohms GAIN RCA Inputs: 32dB  Balanced Inputs: 38dBPOWER/CURRENT CONSUMPTION 900W 1.6A (370W) Class AB Idle  0.2A (46W) Standby DIMENSIONS Height: 220mm (8 3/4 ") Width: 400mm (15 3/4") Depth: 420mm (16 3/4") Weight: 32kg (70lb)

PLINIUS SA REFERENCE                                                                                                                                   Offerta  €.  14.990,00



SA REFERENCE – Finale Stereo – In Classe A  Caratteristiche: Ingressi: 32dB (RCA), 38(XLR) Potenza: 300 Watts RMS per canale su 8 Ohm, 450 Watt su 4, 1000 Watt in mono su 8 Ohm Risposta in Frequenza: 20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHz Distorsione: <0.05% THD at rated power Corrente di picco: 100A. Protetto da Fusibile Rise Time: <5uS Hum & Noise: 100dB below rated output 20 Hz to 20 kHz A weighted Impedenza di Ingresso: 47Kohms Dimensioni: 275mm x 510mm x 535mm Peso: 57kg

 

PLINIUS RA 300 REFERENCE                                                                                                                    Offerta  €.  21.990,00

Caratteristiche: Ingressi:32dB (RCA), 38(XLR)Potenza:300 Watts RMS per canale su 8 Ohm, 450 Watt su 4,1000 Watt in mono su 8 OhmRisposta in Frequenza:20Hz to 20kHz ±0.2dB a 0 Hz e -3db a 70 kHzDistorsione:<0.05% THD at rated powerCorrente di picco:100A. Protetto da FusibileRise Time:<5uSHum & Noise:100dB below rated output 20 Hzto 20 kHz A weightedImpedenza di Ingresso:47KohmsDimensioni:275mm x 510mm x 535mmPeso: 57kg

Reference A-300 Power Amplifier The Reference A-300 celebrates and continues the Plinius tradition of building world-class amplifiers that deliver powerful, pure sound, are built to last and look simply stunning.The Reference A-300 is an evolution of previous models. Throughout the design process each and every part has been reviewed, evaluated and refined. Every subsection of the electronics boasts changes to components, specification, layout and interconnection resulting in a truly sophisticated amplifier. The A-300 uses high quality, low-noise, audio grade capacitors, low-noise power components and custom high capacity power supply capacitors. Couple this with a brand new external styling that still pays homage to Plinius’ signature aesthetic and you have a true force of nature. If you love the feeling of being immersed in music The Reference A-300 promises absolute satisfaction. Power and depth are married together with pureness and clarity. The Reference A-300 is the pinnacle of the Plinius Range. It’s designed to take advantage of every aspect of the Reference M-10 preamplifier’s sophisticated circuitry and drive the finest high-end speakers with finesse.POWER 300 watts RMS per channel into 8 ohms MONO OUTPUT 1000 watts RMS into 8 ohms 1800 watts RMS into 4 ohms FREQUENCY RESPONSE 20Hz to 20kHz ±0.5dB -3dB at 70kHz DISTORTION <0.03% THD at rated power CURRENT OUTPUT 100A short duration peak per channel Fuse protected HUM & NOISE 100dB below rated output 20Hz to 20kHz A weighted INPUT IMPEDENCE 47k ohms GAIN RCA Inputs: 32dB, Balanced Inputs: 38dB POWER/CURRENT CONSUMPTION 1400W, 4.8A (1100W) Class A Idle, 0.8A (184W) Class AB Idle/Standby DIMENSIONS Height: 285mm (11.25") Width: 510mm (20") Depth: 550mm (21.75") Weight: 57kg (125lbs)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



PLINIUS KORU                                                                                                                                    Listino  ufficiale  €. 2.990,00


KORU – Pre Amplificatore Phono  Ingressi: RCA Guadagno Selezionabile: 50/56/60/66 dB Carico Selezionabile: 47k, 470R, 100R, 47R, 22R Risposta in Frequenza: +/-0,2dB 20Hz/20kHz Rapporto Segnale Rumore: 80 dB Distorsione Armonica: 0,01% at tuti i livelli Capacitanza: 100pF, 570pF Uscite: RCA, XLR Bilanciate

Koru Phono Preamplifier The Koru phono preamplifier is presented in the Ross Stevens inspired curved chassis, with a slight twist. The chassis is actually two-in-one, allowing physical separation of the power supply from the amplification circuitry. The power supply boasts a virtual battery approach with over 100,000 micro Farads of capacitance and very sophisticated 2 stage regulation. This ensures the lowest impedance and consequently extreme accuracy of power delivery to the amplification stages. The amplification and equalisation uses the latest components ensuring accuracy and longevity. Low output moving coil cartridges as well as higher output moving magnet types can be used and there is a full range of user adjustments available on the rear panel. Both Single Ended and Balanced Output signals are catered for and with passive high frequency and active low frequency equalisation the Koru Phono Preamplifier will maintain stability and finesse no matter what type of music you enjoy. Handling the original analogue signal from the vinyl with modern electronics components and layout techniques is a satisfying way to mix the old and new technology for a listening session with your favourite artists.DISTORTION Typically <0.01% THD at all levels below clipping HUM & NOISE -80dB at rated input level, A weighted with 5mV input INPUT RCA Unbalanced OUTPUTS RCA unbalanced XLR balanced POWER/CURRENT CONSUMPTION 10W 0.03A (7W) Idle/Standby INPUT CAPACITANCE User adjustable, 100pF, 570pF ADJUSTABLE GAIN 50dB, 56dB, 60dB, 66dB ADJUSTABLE LOAD 47k ohms, 22k ohms, 1k ohms, 470 ohms, 220 ohms, 100 ohms, 47 ohms, 22 ohms DIMENSIONS Height: 90mm (3 1/2") Width: 450mm (17 3/4") Depth: 400mm (15 3/4") Weight: 7kg (15lb)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


PLINIUS TOKO                                                                                                                                   Listino  ufficiale  €. 5.800,00

TOKO – DLNA SERVER – CD Trasport Caratteristiche:  Conversione: 24-bits 192 File Supportati: FLAC, LPCM, AIFF, MP4 (tutti fino 24/192) Uscite: XLR, RCA Connettivitŕ: 10/100 Ethernet Distorsione: <0.01% THD at rated input level Hum & Noise: -100dB at rated input level, A Weighted Livello Massimo di Uscita: 2V RMS into 10kohms or higher Impedenza di uscita: Typically 100ohms Impedenza uscita digitale: 75ohms Dimensioni: 105mm x 450mm x 400mm Peso: 10kg

Toko Digital Audio Player The Toko digital audio player is equally at home with a conventional CD in its slot loaded transport or when connected to an Ethernet network, you can connect the Toko to your other DLNA compatible components, for example a P.C.The quality CD slot loading transport used on the Toko is the same as that used in the Mauri CD player. When a CD is in the slot the Toko acts as a CD player and when it is ejected the Toko reverts to networked digital player mode.When in networked player mode wireless or wired Ethernet communication is used for transmission of both music files and control signals. When using the CD player a traditional Plinius remote control can be used to control the CD functions, or if an approved remote IR blaster is in the room the remote control display on the Plinius Aratki app on an iPad can take over those functions.With distinctive styling, benchmark build quality and stunning sound the Toko is a great addition to the other traditional components in your music system. Popular files types such as FLAC, LPCM, AIFF, ALAC and MP3 are all catered for. Gapless Playback is also supported.SUPPORTED AUDIO FILE SERVER DLNA Digital Media Servers SUPPORTED PLAYBACK CONTROL DLNA Digital Media Controllers, DLNA Mobile Digital Media Controllers, UPnP smartphone applications, iPad/iPod applications DAC CAPABILITY 24 bit, 192ks/sAUDIO CODEC SUPPORT FLAC (up to 24/192), LPCM (up to 24/192), ALAC (up to 24/192), AIFF, MP3, WAV CONNECTIVITY10/100 EthernetANALOGUE OUTPUT 1 x RCA stereo pair 1 x XLR stereo pair FREQUENCY RESPONSE20Hz to 20kHz ±0.2dB SIGNAL TO NOISE RATIO -100dB at rated input level, A WeightedDISTORTION <0.01% THD at rated input levelINPUT 1 x RJ45 connector MAXIUM OUTPUT LEVEL 2V RMS into 10k or higher OUTPUT SOURCE IMPEDENCE Typically 100R POWER/CURRENT CONSUMPTION 60W 0.22A (53W) Idle DIMENSIONS Height: 105mm (4")Width: 450mm (17 3/4")Depth: 400mm (15 3/4") Weight: 10kg (22lbs)
 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietŕ e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it