HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 



Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MARK lEVINSON  N°519                                                                                                            Listino  ufficiale  €. 25.385,00

    

MARK LEVINSON N°519 LETTORE AUDIO  Audio Media Player, lettore CD Audio con la tecnologia brevettata HARMAN Clari-Fi, audio streaming con o senza fili, Bluetooth audio aptX, porta USB, rete dati, ingressi audio bilanciati XLR, sbilanciati RCA, 2 ingressi audio digitali coassiali e 2 ottici, supporta audio stereo: 24- bit/192kHz PCM, 5.8 MHz DSD, FLAC, ALAC e altri, Spotify, TIDAL, Qobus, Deezer, Rhapsody, internet radio (a seconda di regione), grande display a colori, telecomando IR incluso, controllo anche dalle app iOS e Android e web browser, Mark Levinson DAC con processore ESS Sabre a 32-bit per eccezionali performance jitter-free, percorso segnale proprietario Mark Levinson completamente discreto, accoppiato direttamente, completamente bilanciato e dual-monoaural, uscite analogiche bilanciate XLR e sbilanciate RCA con il controllo di volume, uscite audio digitali, possibile connessione diretta ad amplificatori di potenza, uscita cuffie sul pannello frontale senza la neccessità di un preamplificatore.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MARK lEVINSON  N°585                                                                                                            Listino  ufficiale  €. 15.320,00

       

MARK LEVINSON N°585 AMPLIFICATORE INTEGRATO  STEREO Amplificatore integrato a 2 canali in classe AB complettamente differenziale, 2x200W RMS a 8 Ohm e stabile a 2 Ohm, convertitore D/A 32 bit/192 kHz con peresa USB asincrona, processamento audio brevetato ClariFi™ per segnali audio compressi, uscita analogica pre-out con crossover a 80 Hz selezionabile per i sistemi 2.1, 1 ingresso audio bilanciato (XLR), 3 ingressi audio sbilanciati (RCA), 1 ingresso audio digitale USB, 1 ingresso audio digitale AES-EBU, 2 ingressi audio digitali coassiali, 2 ingressi audio digitali ottici, 1 uscita audio analogica pre-out, 1 porta Ethernet, USB, RS-232, IR, Trigger input e output (12V), telecomando IR incluso, dimensioni (LxAxP): 434x193x434x506 mm, peso: 34 kg.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MARK lEVINSON  N°523                                                                                                            Listino  ufficiale  €. 19.100,00

       

MARK LEVINSON N°523 PREAMPLIFICATORE STEREO DESCRIZIONE PROVVISORIA: Preamplificatore stereo Dual-Monoaural, ingresso Phono MM e MC integrato, 6 ingressi audio linea analogici (N.2 XLR, 3 RCA, 1 Phono), 2 uscite analogiche: (n.1 XLR, n.1 RCA), completamente discreto, accoppiato direttamente, completamente bilanciato e dual-monoaural, con il controllo volume bilanciato R-2R ,stadi di uscita a alta corrente indisturbati da cavi di connessione lunghi o capacitivi, impostazioni per i carichi resistivi e capacitivi, possibilità di pilotare direttamente le cuffie con gli stessi stadi d'uscita linea per le performance di riferimento.

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone output Highlights •Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path •Class-A Main Drive Headphone output for up to 32-ohm headphones using main circuit •Designed and handcrafted in the USA •Discrete, balanced R-2R Ladder volume control for precision and performance •Six analog line-level and phono inputs; balanced, single-ended, and headphone outputs •Class-A Pure Phono stage with physically separated channels for MC and MM •Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

MARK lEVINSON  N°526                                                                                                            Listino  ufficiale  €. 25.385,00

    

MARK LEVINSON N°526 PREAMPLIFICATORE STEREO Preamplificatore stereo Dual-Monoaural con DAC ad alta risoluzione e ingresso Phono MM e MC integrato, 5 ingressi audio linea analogici, 6 ingressi audio digitali, acclamato DAC Mark Levinson con la tecnologia HARMAN Clari-Fi, percorso segnale proprietario Mark Levinson completamente discreto, accoppiato direttamente, completamente bilanciato e dual-monoaural, con il controllo volume bilanciato R-2R ladder, audio ad alta risoluzione 24-bit/192kHz PCM e 5.8MHz DSD, stadi di uscita a alta corrente indisturbati da cavi di connessione lunghi o capacitivi, impostazioni per i carichi resistivi e capacitivi, possibilità di pilotare direttamente le cuffie con gli stessi stadi d'uscita linea per le performance di riferimento. . Cod. art.: PHOMP2152

MARK lEVINSON  N°526                                                                                                           Listino  ufficiale  €. 37.960,00

 

MARK LEVINSON N°52 PREAMPLIFICATORE DUALMONOAURAL Preamplificatore stereo Dual-Moaural composto da due chassis, risposta in frequenza 10 Hz-40 kHz (+/-0.2dB, livello linea), crosstalk <120 dB,range controllo volume 80 dB, rapporto segnale/rumore <120 dB (20 Hz-20kHz), 4 ingressi audio analogici sbilanciati RCA, 3 ingressi audio bilanciatiXLR, 1 ingresso Phono MM e MC, 2 uscite audio duplicate sia suconnettore RCA e sia su XLR, porta USB A per aggiornamenti firmware, porta RS-232, porta Ethernet, porta IR, trigger 12 V, dimensioni (LxAxP): 43,8x22,2x33 cm, peso: 27 kg.


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


      

MARK lEVINSON  N°532H                                                                                                       Listino  ufficiale  €. 10.295,00

 

MARK LEVINSON N°532H AMPLIF. A 2 CANALI  Amplificatore a 2 canali a stato solido, 2x300W RMS a 8 Ohm, risposta in frequenza 10Hz-20kHz +/-0.5dB, rapporto segnale rumore >85dB, alimentazione indipendente per ogni canale, 2 ingressi audio bilanciati (XLR), 2 ingressi audio sbilanciati (RCA), 2 uscite audio amplificate "Hurricane", 1 porta MLNet (Ethernet), Trigger input (3-12V), dimensioni (LxAxP): 45.1x19.4x50.4 cm, peso: 33.6 kg. Cod. art.: PHOMP1207

Reliable, high-power in four different channel configurations provide ideal solutions for any system Independent power supply components for each channel maximize isolation and improve imaging Isolated chassis and signal grounds minimize noise, optimizing detail even at low listening levels Balanced and single-ended inputs Both Ethernet and 12V Trigger control capabilityNº 531H, Nº 532H, Nº 533H Input & Output Connectors: One balanced XLR input per channel. One unbalanced RCA input per channel. One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) Control Connectors: One Ethernet 10Base-T port.  One 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc.  One 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc. 3-pin IEC standard power connector  Rated Output Power: 20Hz to 20 kHz at <0.5% THD, 300W per channel @ 8Ω, full output from 2.25Vrms Frequency Response: Within 0.5dB from 10Hz to 20 kHz Signal-to-Noise Ratio: >85dB, reference level: 2.83 Vrms Input Impedance: 60KΩ (balanced);  30KΩ (unbalanced) Voltage Gain: 26.8dB Input Sensitivity: 2.83Vrms output at 130mVrms input Power Requirements: 100V~, 120V~, 230V~, factory set for destination country Nº531H: 300W; Nº532H: 600W;Nº533H: 900W Dimensions: Height (with feet): 7.65” (19.4cm) Height (without feet): 6.97” (17.7cm) Width: 17.75” (45.1cm) Depth: 19.83” (50.4cm) Net Weight: Nº531H: 52.5 lbs (23.8kg) Nº532H: 74.0 lbs (33.6kg) Nº533H: 90.0 lbs (40.8kg)  Shipping Weight: Nº531H: 62.5 lbs (28.4kg) Nº532H: 84.0 lbs (38.1kg) Nº533H: 100.0 lbs (45.4kg) Operating Environment: Operating temperature: 0º to 35ºC (32º to 95ºF). Storage temperature: –30º to 75ºC (–22º to 167ºF) Relative humidity: 95% maximum without condensation


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MARK lEVINSON  N°534                                                                                                              Listino  ufficiale  €.25.385,00

 

MARK LEVINSON N°534 AMPLIFICATORE DUAL-MONO AURAL DESCRIZIONE PROVVISORIA: amplificatore dual-mono aural, Design Pure Path Circuit, amplificatore a basso feedback che eroga 250 watt per canale, architettura di classe AB, opera in pura classe A per la maggior parte delle condizioni di ascolto. 250w per canale a 8 ohm, 500w per canale a 4 ohm con stabilità a 2 ohm. Interfacciamento al sistema di controllo: Porta Ethernet, RS-232, trigger, web control. N.2 ingressi bilanciati, n.2 ingressi single-ended. N.4 ouput con connettori hurricane. Dimensioni: A:17,8cm, L:45,1cm P:50,8 cm. Peso: 48,5 Kg

MARK lEVINSON  N°536                                                                                                            Listino  ufficiale  €. 19.100,00

 

MARK LEVINSON N°536 Amplificatore monoaurale Amplificatore monoaurale Classe AB, monoblocco, potenza 400W RMS a 8 Ohm e 800W RMS a 4 Ohm, guadagno in tensione e stadi d'uscita operano in Classe A, accopiato direttamente, senza capacitori nel percorso del segnale, risposta in frequenza: 10Hz a 20kHz +-0,05dB. Impedenza in entrata: 60kohm bilanciato, 30kohm sbilanciato. Sensibilità d'ingresso: 2,83Vrms con 150mV d'ingresso. Rapporto Segnale/Rumore: >85dB. Distorsione armonica totale: >0,25%. Alimentazione richiesta: 1500W. Connettori di controllo: Ethernet, RS-232, Trigger IN, Trigger Out, USB-A, mini USB. Connettori Input: n.1 XLR bilanciato, n.1 RCA sbilanciato. Connettori di uscita altoparlanti: 2 paia tipo "Hurricane". . Guadagno di tensione: 25.5 dB. Dimensioni: (LxAxP): 438x196x533 mm. Peso: 44 kg.

  

MARK lEVINSON  N°53                                                                                                               Listino  ufficiale  €. 31.675,00

 

MARK LEVINSON N°53 AMPLIFICATORE MONO Amplificatore Mono di riferimento a stato solido, 1x500W RMS a 8 Ohm, risposta in frequenza 10Hz-20kHz +/-0.1dB, rapporto segnale rumore >85dB, voltage gain 26.8dB, 1 ingresso audio bilanciato (XLR), 1 ingresso audio sbilanciato (RCA), doppia uscita audio amplificata "Hurricane", 2 porte Link2 (IR) e MLNet (Ethernet), Trigger input (3-12V), dimensioni (LxAxP): 21.4x53.0x51.8 cm, peso: 61.3 kg. Cod. art.: PHOMP1204

As with all Mark Levinson Reference products, it goes without saying that the primary function of the Nº53 is to reproduce sound at the purest level possible. Following in the tradition of such Mark Levinson solid state power amplifier products as the ML-2 and the Nº33, the new Nº53 continues to prove that solid state electronics can rival the best sounding tube-based designs. More specifically, the Nº53 is the first ever switching power amplifier from Mark Levinson. Despite their numerous advantages – increased efficiency, more power, compact dimensions, decreased weight and less heat dissipation than their linear counterparts – switching power amplifiers have generally been viewed with skepticism from the audiophile community due to the technical limitations inherent in switching designs and assumptions about the resulting sound quality. The Nº53, however, is the end result of an extensive R&D effort to find ways to emphasize the advantages of switching power amplifiers while overcoming their weaknesses, creating a landmark product truly worthy of the Mark Levinson Reference designation.The Nº53 is rated at an impressive 500 Watts into 8 Ohms, measures merely 21" H × 9" W × 21" D and weighs only 135 lbs — certainly playing up the strengths for which switching power amplifiers are known. It is capable of generating phenomenal power levels into virtually any speaker load to support both instantaneous and continuous demands. More impressive still, the Nº53 accomplishes this feat without the slightest change in performance capability while maintaining a constant, thermally-balanced operating temperature. Unlike most switching amplifiers, the Nº53 has superbly efficient power management capabilities, so its operating temperature does not change no matter how hard or long the amplifier is driven.Switching power amplifiers are so named because they switch the output devices on and off in very rapid succession, mimicking the input signal. One set of output devices drives the positive half of the waveform, and a separate set drives the negative half. The result is less power being wasted as heat, because the workload is essentially cut in half. Unfortunately, it also creates some significant design challenges in terms of how to manage the switching noise – the noise created from the output devices constantly turning on and off – as well as a phenomenon called “dead bands.” Traditionally, these have been the two contributing factors to switching power amplifiers’ reputation for inferior sound quality. However, Mark Levinson has raised the bar by breaking through these barriers with the Nº53.The Nº53 removes switching noise without affecting the audio with the introduction of the new patented and proprietary Interleaved Power Technology (IPT) which, among other things, raises the switching frequency of the Nº53 to an extremely high 2MHz. The advantages of this are twofold: First, it pushes the fundamental switching noise and its harmonics far above the limit of human hearing, so that they have no direct affect on sound quality; second, it allows for easier removal of the switching noise from the signal by using much gentler filters, having no negative effect in the crucial audio band. The result is a frequency response that is ruler flat across the entire audio spectrum and is only a few dB down at 100kHz – impressive for any power amplifier, but staggering for a switching design.The Nº53 has also overcome the “dead band” problem. Dead bands are silent gaps in the audio output, created when the output devices driving the positive half of the signal and the negative half of the signal are both turned off. This generally occurs at every “zero crossing point,” whenever the audio waveform crosses over from positive amplitude to negative amplitude or vice versa. This is a constant phenomenon – in a 20kHz audio signal, this point occurs 40,000 times per second. It becomes a problem, however, because even the best output devices are not able to turn on and off instantaneously, so the result is a number of “dead bands” of signal every second. Obviously, the larger the gap, the more detrimental to the audio signal. Many designs minimize dead bands by ensuring that both output devices are off for as brief a period as possible. Unfortunately, this increases the potential for the output devices to be on simultaneously, which can damage or destroy them. The Nº53, on the other hand, was designed using a patented technology that allows both sets of output devices to be on simultaneously for short periods of time, to completely eliminate dead bands without damaging the output devices or reducing their life expectancy. In other words, this solves the dead band problem and maintains the Nº53’s long-term reliability.Power amplifiers’ challenge and goal is to amplify the incoming audio signal without distorting it and effortlessly drive a wide range of loudspeaker impedances at any volume level with the forcefulness and grace that reference-quality sound reproduction demands. The Nº53 is designed toward that end. The chassis is a compact vertical design consisting of three separate internal compartments to provide shielding and isolation of the different circuitry – the power supply in the bottom, the four amplifiers in the middle and the control circuitry in the top. The power supply is completely isolated and shielded from the rest of the amplifier to reduce interference from magnetic fields and high current devices. The extremely low-noise toroidal transformer features an oversized 2.8kVA transformer with four 47,000µF low-ESR capacitors. The middle section’s four amplifiers, featuring a pair of coils each, are arranged symmetrically and mirror-imaged to maintain separation. Working together, the four amplifiers raise the effective switching frequency from 500kHz to 2MHz to produce the best sound quality known from a switching amplifier. The control circuitry has its own independent regulated power supply and is shielded from the rest of the amplifier to keep it from interfering with the audio circuits


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MARK lEVINSON  N°533H                                                                                              Listino  ufficiale  €. 12.810,00

 

MARK LEVINSON N°533H AMPLIF. A 3 CANALI Amplificatore a 3 canali a stato solido, 3x300W RMS a 8 Ohm, risposta in frequenza 10Hz-20kHz +/-0.5dB, rapporto segnale rumore >85dB, alimentazione indipendente per ogni canale, 3 ingressi audio bilanciati(XLR), 3 ingressi audio sbilanciati (RCA), 3 uscite audio amplificate"Hurricane", 1 porta MLNet (Ethernet), Trigger input (3-12V), dimensioni (LxAxP): 45.1x19.4x50.4 cm, peso: 40.8 kg. Cod. art.: PHOMP1208

Reliable, high-power in four different channel configurations provide ideal solutions for any system Independent power supply components for each channel maximize isolation and improve imaging Isolated chassis and signal grounds minimize noise, optimizing detail even at low listening levels Balanced and single-ended inputs Both Ethernet and 12V Trigger control capabilityNº 531H, Nº 532H, Nº 533H Input & Output Connectors: One balanced XLR input per channel. One unbalanced RCA input per channel. One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) Control Connectors: One Ethernet 10Base-T port.  One 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc.  One 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc. 3-pin IEC standard power connector  Rated Output Power: 20Hz to 20 kHz at <0.5% THD, 300W per channel @ 8Ω, full output from 2.25Vrms Frequency Response: Within 0.5dB from 10Hz to 20 kHz Signal-to-Noise Ratio: >85dB, reference level: 2.83 Vrms Input Impedance: 60KΩ (balanced);  30KΩ (unbalanced) Voltage Gain: 26.8dB Input Sensitivity: 2.83Vrms output at 130mVrms input Power Requirements: 100V~, 120V~, 230V~, factory set for destination country Nº531H: 300W; Nº532H: 600W;Nº533H: 900W Dimensions: Height (with feet): 7.65” (19.4cm) Height (without feet): 6.97” (17.7cm) Width: 17.75” (45.1cm) Depth: 19.83” (50.4cm) Net Weight: Nº531H: 52.5 lbs (23.8kg) Nº532H: 74.0 lbs (33.6kg) Nº533H: 90.0 lbs (40.8kg)  Shipping Weight: Nº531H: 62.5 lbs (28.4kg) Nº532H: 84.0 lbs (38.1kg) Nº533H: 100.0 lbs (45.4kg) Operating Environment: Operating temperature: 0º to 35ºC (32º to 95ºF). Storage temperature: –30º to 75ºC (–22º to 167ºF) Relative humidity: 95% maximum without condensation

MARK lEVINSON  N°535H                                                                                              Listino  ufficiale  €. 15.325,00

 

MARK LEVINSON N°535H AMPLIF. A 5 CANALI Amplificatore a 5 canali a stato solido, 5x200W RMS a 8 Ohm, risposta in frequenza 10Hz-20kHz +/-0.5dB, rapporto segnale rumore >85dB,alimentazione indipendente per ogni canale, 3 ingressi audio bilanciati (XLR), 3 ingressi audio sbilanciati (RCA), 3 uscite audio amplificate "Hurricane", 1 porta MLNet (Ethernet), Trigger input (3-12V), dimensioni(LxAxP): 45.1x19.4x50.4 cm, peso: 44.7 kg. Cod. art.: PHOMP1209

Reliable, high-power in four different channel configurations provide ideal solutions for any system Independent power supply components for each channel maximize isolation and improve imaging Isolated chassis and signal grounds minimize noise, optimizing detail even at low listening levels Balanced and single-ended inputs Both Ethernet and 12V Trigger control capabilityNº 535H  Input & Output Connectors: One balanced XLR input per channel. One unbalanced RCA input per channel. One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models)  Control Connectors: One Ethernet 10Base-T port. One 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc. One 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc. 3-pin IEC standard power connector Rated Output Power: 20Hz to 20 kHz at <0.5% THD, 200W per channel @ 8Ω, full output from 1.84Vrms Frequency Response: Within 0.5dB from 10Hz to 20 kHz Signal-to-Noise Ratio: >85dB, reference level: 2.83 Vrms Input Impedance: 60KΩ (balanced); 30KΩ (unbalanced) Voltage Gain: 26.8dB  Input Sensitivity: 2.83Vrms output at 130mVrms input  Power Requirements: 100V~, 120V~, 230V~, 1000W,  factory set for destination country  Dimensions: Height (with feet): 7.65” (19.4cm) Height (without feet): 6.97” (17.7cm)Width: 17.75” (45.1cm) Depth: 19.83” (50.4cm) Net Weight: 98.5 lbs (44.7kg)  Shipping Weight: 108.5 lbs (49.2kg)  Operating Environment: Operating temperature: 0º to 35ºC (32º to 95ºF). Storage temperature: –30º to 75ºC (–22º to 167ºF) Relative humidity: 95% maximum without condensation Input & Output Connectors: One balanced XLR input per channel. One unbalanced RCA input per channel. One pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel (banana-plug socket not available on the 230 VAC models) Control Connectors: One Ethernet 10Base-T port. One 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc. One 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc. 3-pin IEC standard power connector Rated Output Power: 20Hz to 20 kHz at <0.5% THD, 300W per channel @ 8Ω, full output from 2.25Vrms Frequency Response: Within 0.5dB from 10Hz to 20 kHz Signal-to-Noise Ratio: >85dB, reference level: 2.83 Vrms Input Impedance: 60KΩ (balanced); 30KΩ (unbalanced) Voltage Gain: 26.8dB Input Sensitivity: 2.83Vrms output at 130mVrms input Power Requirements: 100V~, 120V~, 230V~, factory set for destination country Nº531H: 300W; Nº532H: 600W;Nº533H: 900W Dimensions: Height (with feet): 7.65” (19.4cm) Height (without feet): 6.97” (17.7cm) Width: 17.75” (45.1cm) Depth: 19.83” (50.4cm) Net Weight: Nº531H: 52.5 lbs (23.8kg) Nº532H: 74.0 lbs (33.6kg) Nº533H: 90.0 lbs (40.8kg) Shipping Weight: Nº531H: 62.5 lbs (28.4kg) Nº532H: 84.0 lbs (38.1kg) Nº533H: 100.0 lbs (45.4kg) Operating Environment: Operating temperature: 0º to 35ºC (32º to 95ºF). Storage temperature: –30º to 75ºC (–22º to 167ºF) Relative humidity: 95% maximum without condensation

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it