HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MAGICO A3                                                                                             Listino  ufficiale  €.  5.950,00   

Magico is proud to launch the A series. At long last a Magico loudspeaker obtainable for a wider audience; the A3 brings together a bevy of technologies unheard-of at its price point. A fully braced and anodized aluminum enclosure, beryllium tweeter, carbon Nanographene cones, neodymium based motor systems and our renowned elliptical crossover, the A3 is the impossible made possible. High Frequency driver Extended high frequencies are provided by a newly designed Magico pure beryllium-diaphragm tweeter with an optimized 28-mm dome surface based on the fundamental design platform and geometry of the M-Project tweeter. The customized neodymium motor system is encased in an improved back chamber with our latest generation damping materials that facilitate ultra-low distortion, higher power handling, massive dynamic capabilities and extended linear voice coil movement. Midrange Frequency driver The newly developed 6-inch midrange employs a Multi-Wall carbon fiber cone with a layer of XG Nanographene, providing optimal stiffness to weight ratios and an ideal damping factor. Overhung neodymium based motor systems incorporate extra-large magnets to ensure a stabilized magnetic field in the 75-mm pure titanium voice coils of both the midrange and bass drivers. Low Frequency driver Dual 7-inch woofers incorporate a version of the new Gen 8 Magico Nano-Tec cone. The same properties and materials that allow for the proper combination of stiffness, mass and damping are carried through to the lowest frequencies. The chassis has also been simulated and tested for the optimal combination of stiffness and damping. Minimum acoustical impact is achieved through reducing vibration modes while maximizing air flow. A new overhung neodymium (N48) based motor system anchors the low frequency reproducers to accomplish a super stabilized magnetic field. A pure Titanium, 75mm voice coils are consistent with the technology utilized through the midrange.  The A3 Midrange and Low frequency drivers were optimized for minimal music related distortions in its band pass, in both the frequency and time domains using latest state of the art FEA simulation of acoustical, mechanical, electromagnetic and thermal behavior. All of this is now being done on a single platform, allowing Magico to take the next step in performance optimization. Crossover All four drivers in the A3 are acoustically integrated using Magico’s proprietary Elliptical Symmetry Crossover topology that utilizes state-of-the-art components from Mundorf of Germany. The 3-way network features a 24db per octave Linkwitz-Riley filter that maximizes frequency bandwidth while preserving phase linearity and minimizing intermodulation distortion.
Enclosure The A3’s massive sealed-enclosure is, like all Magicos, a tour-de-force of engineering. The enclosure is made entirely from 6061 T6 aircraft grade aluminum, identical materially to the enclosure developed for the Q Series. This braced, complex internal structure is finished externally with an elegant brushed anodized “skin”.  The A3 enclosure is best considered as a simplified Q Series design, with the same materials, the same craftsmanship, and the same attention to design and build detail.  Driver Complement 1" MB7 Beryllium Dome (X1) 6” Midrange Graphene Nano Tec (X1) 7” Bass Graphene Nano Tec (X2) SpecificationsSensitivity: 88dBImpedance: 4 Ohms Frequency Response: 22 Hz – 50 KHz Minimum Recommended Power: 50 Watts RMS Maximum Recommended Power: 300 Watts RMS Dimensions: 44”H x 11”D x 9.25”W (112cm x 27cm x 23cm) Weight: 110 lbs. (50Kg)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

MAGICO S1.5                                                                                                     Listino  ufficiale  €.  7.750,00

Coppia diffusori dinamici in alluminio 2 vie da pavimento in cassa chiusa, finitura opaca

S1.5 Equally suited to traditional two-channel or complex multi-channel applications, and with color options making it aesthetically compatible with any décor, the S1.5 delivers design and performance in an extremely flexible package. The S1.5 employs the same Beryllium tweeter, Nano-Tec mid-range driver technology, as well as Magico’s acoustic-suspension enclosure platform with the rest of the Magico line. The S1.5 performs masterfully as a stand-alone solution, demonstrating tremendous detail and agility throughout its frequency band. When engaged in a home theater solution the results are without peer, the S1.5 performs in perfect harmony alongside its S-Series siblings. SPECIFICATIONS Driver Complement: 1 x 1" Tweeter1 x 7" Mid-woofer Sensitivity: 86dB Impedance: 4 Ohms Frequency Response: 38 Hz - 50 kHz Recommended Power: 50 watts Dimensions: 23"H x 9"D x 10"W (58.5cm x 23cm x 25cm) Weight: 55 lbs. (24.95 Kg)

MAGICO S1 MKII                             Listino  ufficiale  €. 10.950,00

Coppia diffusori dinamici in alluminio 2 vie da surround incassa chiusa, finitura opaca

At first glance the S1 Mk II may appear similar to its predecessor. However, it is entirely redesigned, and incorporates distilled elements of our most recent and ground breaking engineering accomplishments. The design platform of the S1 Mk II features core technologies that are unique to Magico –an all aluminum enclosure, and proprietary driver design that outperforms any other driver available today.The monocoque enclosure of the S1 Mk II is formed from a single piece of extruded aluminum that is 3/8" thick and 12" in diameter. The slender enclosure is supported internally by a new innovative bracing technique along with advanced damping materials and glues that minimize resonance and maximize structural rigidity and stability. A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves.Detailed and extended high frequencies are provided by the newly designed 1-inch Diamond coated Beryllium diaphragm tweeter - first introduced in the S7 - that offers matching sensitivity, wide dispersion and high power handling. A robust motor system and long throw voice coil enables lower distortion and cutoff frequencies never achieved before.Captivating mid-bass performance is provided by a newly designed 7-inch mid bass driver that incorporates Mutli-Wall carbon nanotube and Nanographene which combined is 20% lighter and 300% stiffer than the previous cone material used in the original S1. A new underhung neodymium base motor system substantially increases the S1 Mk2 power handling.A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. Newly designed 4-point outrigger assembly supports the S1 Mk II enclosure and optimizes overall performance. The S1 Mk II is available a new M-Cast finish and the luxurious M-Coat painted finish.SPECIFICATIONS Driver Complement:1 x 1" (2.54cm) Diamond Coated Beryllium Dome 1 x 7" (17.78cm) Graphene Nano-Tec Cone Sensitivity: 86dB Impedance: 4 Ohms Frequency Response: 32 Hz - 50 kHz Recommended Power: 50 watts Dimensions: 43"H x 8.5"D x 9.75"W (109cm x 23cm x 25cm) Weight: 120 lbs. (54.5 kg)

MAGICO S3 MKII                             Listino  ufficiale  €. 20.450,00

Coppia diffusori dinamici in alluminio 2 vie da surround incassa chiusa, finitura opaca

The S3 Mk II nestles in between the S1 Mk II and S5 Mk II and features all of the advanced design elements of the S-Series Mk II models, including a new 9-inch bass driver with the lowest measured distortion born from the design and engineering theories applied to the limited-edition, 10th Anniversary M-Project.Superlative high frequencies are provided by a 1-inch Magico diamond-coated beryllium-diaphragm tweeter that offers matching sensitivity, wide dispersion, and increased power handling over its predecessor. A new aluminum housing for the magnet structure minimizes overall resonance and improves the isolation parameters for the tweeter dome element. The long-throw voice coil enables lower distortion and optimal cutoff frequencies that enhance driver integration with the midrange driver.Extraordinary midrange reproduction is attained from a proprietary 6-inch driver that is formulated using Multi-Wall carbon fiber and a layer of XG Nanographene, which when combined is 20% lighter and 300% stiffer than the previous S-series cone designs. The purpose-built sub-enclosure is made of a proprietary polymer material which provides an optimized environment for the midrange driver to operate within.Deep, powerful, and accurate bass frequencies result from two newly designed 9-inch Magico bass drivers that are produced with advanced manufacturing techniques using a new Multi-Wall carbon, Nanographene cone. The powerful magnet structure controls a 5-inch pure Titanium voice coil that has a 1/2-inch of linear excursion and produces clean, undistorted sound pressure levels up to 112dB @ 50Hz/1-meter.The monocoque enclosure of the S3 Mk II is formed from a single piece of extruded aluminum that is 3/8-inch thick and 12-inches in diameter. The new aluminum top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. A massive 4-point outrigger base lowers the speaker’s center of gravity and increases stability and dynamic range.All four drivers in the S3 Mk II are acoustically integrated using Magico’s exclusive Elliptical Symmetry Crossover topology that utilizes state-of-the-art components from Mundorf of Germany. The dividing network maximizes frequency bandwidth while preserving phase linearity and minimizing intermodulation distortion. Individual driver performance and the loudspeaker in its final form are tested and optimized for acoustical, mechanical, electromagnetic, and thermal behaviors using the latest state-of-the-art Finite Element Analysis simulation testing equipment.SPECIFICATIONS Driver Complement: 1" MBD7 Diamond Coated Beryllium Dome (x1) 6" M390G XG Nanographene Cone (x1) 9" M905G XG Nanographene Cone (x2) Sensitivity: 88dB Impedance: 4 Ohms Frequency Response: 24 Hz - 50 kHz Recommended Power: 50 watts Dimensions: 48.2"H x 12"D x 12W (122cm x 30.5cm x 30cm) Weight: 170 lbs. (77 kg)

MAGICO S5 MKII                                      Listino  ufficiale  €. 27.450,00

Coppia diffusori dinamici in alluminio 3 vie da pavimento in cassa chiusa, finitura opaca

The new S5 Mk II silhouettes its predecessor however that is where any similarity ends. Significant performance enhancements are realized with the implementation of new and advanced transducer and enclosure designs which have been distilled from the extensive engineering research devoted to the S7.A newly designed 1-inch Magico Diamond coated Beryllium diaphragm tweeter provides smooth and extended high frequencies along with matching sensitivity, wide dispersion and increased power handling. A robust motor system and long-throw voice coil design enables lower distortion and cutoff frequencies that enhance driver integration with the midrange driver. A higher benchmark of measured midrange performance is achieved with a newly designed 6-inch Magico driver that is formed of Mutli-Wall carbon and Nanographene. The combined result of these two cutting-edge materials creates a new cone that is 20% lighter and 300% stiffer than the cone used in the S5. A purpose built sub-enclosure made of a proprietary polymer material provides an acoustically optimized rear chamber for the midrange to operate within. The sub-enclosure concept was first introduced in the S3 and provides noticeable enhancements in midrange control and articulation.Newly designed 10-inch Magico bass drivers offer a new motor system with extremely powerful magnets and ultra-stiff aluminum cones that are specially coated and finished with graphene dust caps. The new bass driver is capable of producing incredibly deep, powerful and complex bass frequencies with the utmost speed and accuracy.The impressive enclosure of the S5 Mk II is assembled from extruded aluminum, 1/2-inch thick and 16-inches in diameter. A massive new top plate is machined into an elegant 3D convex shape to minimize enclosure diffraction and break-up vertical standing waves. The thicker base plate incorporates a newly designed 4-point outrigger support that lowers the center of gravity and increases overall stability resulting in lower noise floor and increased dynamics.SPECIFICATIONS Driver Complement:1" (2.54cm) Diamond Coated Beryllium Dome 6" (15.24cm) Graphene Nano-Tec Cone 10" (25.4cm) Aluminum Cone Sensitivity: 88dB Impedance: 4 Ohms Frequency Response: 20 Hz - 50 kHz Recommended Power: 50 watts - 1000 Watts Dimensions: 48"H x 14"D x 15"W (122cm x 36cm x 38cm) Weight: 220 lbs. (100 kg)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MAGICO Q1                                           Listino  ufficiale  €. 18.150,00

Sostituire un prodotto rivoluzionario ed iconico è un esercizio tanto tecnico ingegneristico quanto emozionale ed umano. Ogni nuova generazione di prodotti, oltre a migliorare le performance della linea precedente, deve porre un nuovo riferimento da quale partire per sviluppare tutte la nuova gamma di prodotti. Oggi la Mini II rappresenta un classico nella storia dell’high-end e la sua presenza è ancora viva e vegeta nonostante la crisi generale. Una instancabile ricerca ha prodotto due nuove unità motrici in grado di gestire meglio la potenza e di estendere in basso la risposta in frequenza di 7 hz rispetto alla venerabile Mini II. Questa ricerca ha interessato anche lo stand che adesso implementa lo stesso sistema di smorzamento utilizzato nella piattaforma Q e che risolve tutti i problemi di risonanza classici dei supporti tradizionali. Invece di aggiungere massa allo stand e di disaccoppiarlo dal diffusore, la Q1 è direttamente accoppiata ad esso che funge da sistema di smorzamento. Il nostro caratteristico approccio ai problemi molto meticoloso, permette di sviscerare una gamma di aspetti più ampia. Nella Q1, compromessi nel fattore di forma, massa, richiesta di potenza e versatilità non sono stati necessari per eliminare le inefficienze. Il risultato è un diffusore bookshelf da stand realmente fullrange con una performance esplosiva. E’ il monitor a 2 vie che non è mai stato costruito prima, da Magico e da nessun altro.Coppia diffusori dinamici in alluminio con piedistallo 2 vie in cassa chiusa, finitura opaca Finitura anodizzata per diffusori Q1 + 1.750,00 euro  a  diffusore Dimensioni con lo stand : 112cm 39cm 26cm Peso totale: 54 kg ognuna con lo stand Peso Q1: 27 kg ognuna senza stand Tweeter: 1″ Midrange: 7″ Sensibilità: 86dBImpedenza: 5 Ω, 4Ω minimo a 146Hz Risposta in frequenza: +/- 3dB 32Hz – 50Khz Potenza raccomandata: 50 Watts

Q1 Replacing an iconic and revolutionary product is as much an exercise in understanding human emotion as it is in engineering. For any new generation of products, in addition to being compared to its predecessor by actual performance, there is a need to contend with the intense feelings of witnessing the introduction of a loudspeaker so far ahead of its time that it redefines a genre.Today, the Mini II stands within the high-end as a classic, its influence rising far above the resulting industry disquiet. For Magico, it marks the starting point of an even greater pursuit. The Q1 is representative of this pursuit in both the demands it meets from a performance standpoint and the technology it employs to achieve that. Tireless driver development has yielded two new drive units allowing for better power handling and an additional 75Hz of bass extension than the venerable Mini II. Continued research into the damping mechanism used in the Q platform has also resulted in addressing the common problem of resonance in the stand mount. Instead of attempting to add mass to the stand and decoupling the speaker, the Q1 is directly coupled and the stand itself is a damping mechanism.As in most products, addressing problems with more precision allows us to carefully consider a broader range of demands. In the Q1, compromises of form factor, mass, power requirements, and versatility were not necessary due to eliminating inefficiencies in common problem solving design principles. The outcome is a compact, convertible stand-mounted/bookshelf loudspeaker with explosive, true full-range performance. It is the 2-way monito  that has never before been built, by our company or any other.

MAGICO Q3                                                                          a RICHIESTA         

L’ultima arrivata in famiglia, la Q3 ostenta il suo pedigree dentro e fuori. Incorporando il design della piattaforma Q che permette di avere dei cabinet per diffusori ingegnerizzati alla perfezione e con il nuovo ed efficientissimo driver da 7” Nano-Tec, la Q3 raggiunge un efficienza di 90db ponendo un nuovo standard per i diffusori a gamma intera di media grandezza. Pensando alla più grande Q5 viene da pensare che la Q3 sia solo una semplice versione economica del solito diffusore. Sotto alcuni aspetti è vero; il driver per le alte frequenze MBe-1, il baffle curvato senza soluzione di continuità per diminuire le diffrazioni ed le punte isolanti sono alcune caratteristiche che i due modelli condividono. Detto questo, dato che le dimensioni e la forma differiscono, così come l’ambiente in cui si muovono i driver e quindi il loro comportamento e di conseguenza il crossover, la Q3 ha dei punti di risonanza diversi dalla sorella maggiore. Per far fronte a questo, una diversa disposizione e progettazione del sistema di smorzamento sviluppato per la Q5 viene utilizzato in maniera diversa ed in aree dove si rende necessario. Diversi livelli di forza sono applicati a diversi spessori di materiale smorzante per eliminare tutte le cause di distorsione dovute alle risonanze del cabinet su tutta la banda audio Coppia diffusori dinamici in alluminio 3,5 vie da pavimento, cassa chiusa, finitura opaca Dimensioni: 119.38cm 41.64cm 26.67cm Peso: 113 kg ognuna Tweeter: 1″ (2.54cm) cupola in berillio Midrange: 6″ (15.24cm) Nano-tec Woofer: Tre 7″ (17.78cm) Nano-tec–cone Sensibilità: 90dB Impedenza: 5 Ω, 2.8Ω minima a 75Hz Risposta in frequenza: +/- 3dB 26Hz – 50Khz Potenza raccomandata: 30 Watts minimo

MAGICO Q7MKII                                                              a RICHIESTA           

La strada percorsa per creare il diffusore di una classe oltre i limiti del conosciuto a livello mondiale ha alzato l’asticella di cosa significhi progettare e realizzare un diffusore oggi. Andare ad aumentare le prestazioni della nostra linea Q e definire parametri nuovi che andassero a migliorare quelli della innovativa Q5 è stato un compito molto difficile. La nostra sfida è stata quella di fondere tutte le nostre innovative tecnologie in un diffusore di riferimento che dal sussurro più debole ai livelli di pressione sonora più alti, mantenesse la stessa compostezza e fedeltà sonora portando la prestazione a livelli sconosciuti. La sfida è stata accolta. Il risultato è un diffusore senza limiti di prezzo, dalla dinamica infinita, alta efficienza, estensione estrema e trasparenza incredibile. Abbiamo ottenuto tutto quello che ci aspettavamo e qualcosa che non potevamo aspettarci ed immaginarci. Siamo lieti di presentarvi la Q7. TECNOLOGIA DEI DRIVER Per riuscire a raggiungere i traguardi prefissati in questo progetto e per far si che fossero validi sotto ogni condizione di lavoro, ogni driver della Q7 (diffusore a 4 vie e 5 drivers) è stato progettato partendo da un foglio bianco. La prerogativa era di creare drivers facili da pilotare, con una sensibilità di 94db. Una efficienza sorprendente che spinge la Q7 a livelli di prestazioni impensabili pur mantenendo ogni granello di risoluzione. Per fare ciò abbiamo fatto ricorso ai magneti al neodimio che sono 10 volte più potenti di quelli tradizionali. Due woofer da 12 pollici ed un mediobasso da 10 pollici hanno portato la nostra tecnologia Nano-Tec nei più grandi coni da noi mai realizzati. Lavorando di concerto, portano la risoluzione e l’estensione della gamma bassa e bassissima a livelli mai pensati. CABINET Utilizzando le più avanzate analisi agli elementi finiti per lo studio del comportamento di un driver all’interno di un involucro, le tecniche di costruzione della serie Q sono state ripensate in una configurazione ancora più specifica e precisa. Composta da oltre 100 parti di alluminio, rame ed acciaio inossidabile connessi tutti da più di 650 elementi di fissaggio in un labirinto di setti interni appositamente dimensionati e posizionati, la Q7 è una perfetta commistione di massa, smorzamento e rigidità. Un nuovo telaio a tre assi, disaccoppiatori in rame, e un cabinet interno flottante specifico per il midrange di una forma priva di spigoli e facce piane che elimina ogni tipo di risonanza ed evita che il cabinet stesso divenni una sorgente di suono riflesso, rendono la Q7 un vero e proprio capolavoro di tecnologia. CROSSOVER Per realizzare il filtra a 4 vie della Q7 abbiamo utilizzato la tecnica del crossover ellittico di Magico. Ancora una volta abbiamo lavorato a fianco dei maggiori produttori mondiali di componenti per creare qualcosa di veramente unico e speciale. Resistenze custom ultra precise, condensatori e bobine, sono stati progettati per amalgamarsi alla perfezione con la rete crossover. La Q7 è il nostro traguardo più alto, un trionfo tecnologico che è piena espressione della passione estrema e delle capacità del team Magico.  Coppia diffusori dinamici in alluminio 4 vie da pavimento,cassa chiusa, finitura anodizzata Dimensioni: 119 cm x 50 cm x 30cm Peso: 190.5 kg Tweeter: 1″ Ring Radiator Mid-range: woofer 6″ Nano-Tec woofer Mid-bass: 9″ Nano-Tec woofer Low frequency: 2 x 9″ Nano-Tec woofers Sensibilità: 86dB Impedenza: 4 Ω, 2.75 Ω minimo Risposta in frequenza: 18Hz – 50Khz Potenza raccomandata: 50 Watts per canale minimo

Q7 Mk II In the constant pursuit of perfection, the new Q7 Mk II represents Magico’s leading edge engineering capabilities which allows us to surpass the superb performance of the original Q7. The design and art form factor of the Q7 remains intact however the scientific research applied to the new Q7 Mk II brings forth radically new and cutting-edge technologies that are found in a newly designed tweeter and midrange driver along with state-of-the-art crossover componentry.The Q7 Mk II represents a cost-no-object loudspeaker with limitless micro-macro dynamics, high-efficiency, extreme extension, re-defined transparency yielding performance from the faintest whisper to the most ear deafening sound-pressure levels while preserving an unheard degree of composure and fidelity. It is with pride that we introduce the new Q7 Mk II. Using Advanced Finite Elements Analysis to study ‘in-box’ driver behavior, the Q-Series' construction techniques were redeployed in a configuration more finely tuned to the specific parameters of ‘driver to enclosure’ interaction. Comprised of over 100 parts of aluminum, copper, and stainless steel, all affixed with over 650 fasteners in a calculated labyrinth of internal bracing, the Q7 provides the ideal combination of mass, dampening and rigidity. A new three-axis matrix frame, copper decoupling levels, and a 'floating' midrange cavity yield the most effective multi-faceted strategy of eliminating the cabinet as a secondary acoustic source, making the Q7 a remarkable architectural feat. In the development of the Q7 Drivers a colossal effort was made to minimize eddy currents in the iron parts of the under-hang motor system. Eddy currents are created by the voice coil movement and produce chaotic magnetic fields which work "against" the fixed magnetic field and thus create distortions. The best way to reduce these currents is to saturate the iron as much as possible. When the iron around the coil is totally saturated no induced flex can develop, i.e. no eddy currents. In order to do that a lot of design, precision machining of the parts and huge magnets are required. In the picture you can see the flux density of our 10" motor system. The color purple represents fully statured iron, yellow is about 90% saturation (Industry standard is less than 20%). These are breakthrough performance which enables the voice coil to move without any electromagnetic obstructions (the inductance of the woofer is measured at 0.085 mH!)SPECIFICATIONS Driver Complement: 1 x 1" (2.54cm) Tweeter 1 x 6" (15.24cm) Midrange 1 x 10" (25.4cm) Midbass 2 x 12" (30.48cm) Bass Sensitivity: 94dB Impedance: 4 Ohms Frequency Response:  20 Hz - 50 kHz Recommended Power: 50 - 1200 Watts Dimensions: 60"H x 32"D x 15"W  (152cm x 81cm x 38cm) Weight: 750 lbs. (340 k


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MAGICO M3                                                                                                             a RICHIESTA         

M3 In 2014 the introduction of the limited edition M-Project provided a glimpse of the cutting edge designs and advanced technologies that were being developed at Magico. Over the past two years intense research has been dedicated to exploring new methodologies and materials which are now incorporated in the Magico M3.A new carbon fiber side panel design, an all-graphene midrange and bass driver design, and the phenomenal 28mm diamond coated beryllium tweeter, previously found only in the M-Project, all come together in what is the most sophisticated loudspeaker we have ever created.An internal three-axis matrix framework in the M3 contributes to an extremely rigid enclosure and eliminates unwanted resonances and colorations, allowing all drivers to perform with stunning resolution and dynamics.The M3 midrange driver operates in a purpose built sub-enclosure made of a proprietary polymer that enhances midrange control and articulation. This sub-enclosure concept was first used in the S3 and is now applied to our more recent 3-way speaker designs.The M3 incorporates the Diamond coated Beryllium diaphragm tweeter (28-mm) used in the MPro. The optimized geometry and the Diamond coating on the Beryllium aligns the acoustical properties closer to perfection without adding extra weight of a full Diamond dome, this revolutionary tweeter design offers a near perfect weight to stiffness ratio that is unmatched in the industry. The new tweeter provides extra-long excursion movement and uses a neodymium based motor system that is customized to match the sensitivity and power handling capabilities of the M3 while maintaining ultra-wide dispersion characteristics and ultra-low distortion measurements.Magico is the world’s first manufacturer to utilize graphene in the development of a radically new and advanced loudspeaker cone design. Graphene has many extraordinary properties and is approximately 100 times stronger than the strongest steel. The newly designed Magico six-inch midrange and seven-inch bass driver cones found in the M3 are both manufactured using Multi-Wall carbon XG Nanographene and an ultra-stiff proprietary new carbon weave which is 20% lighter and 300% stiffer than previous cone material we used in Magico loudspeaker offerings. Three seven-inch M3 bass drivers are vertically aligned to achieve ideal room integration and reproduce the lowest registers of bass frequency with speed and accuracy. The M3 bass drivers are optimized for minimal music related distortions in the frequency and time domain using the latest state-of-the-art FEA simulation.A contributing element to the stunning overall sound performance of the M3 is the application of the MPOD. The MPOD is based on the scientific principles of Constrained Layer Damping (CLD) which are well documented and in our opinion, the most effective way to channel unwanted vibrations away from a component and its platform.Operating under massive weight the MPOD is a noise channeling system that effectively dissipates resonance while maintaining ultimate coupling properties to the floor resulting in remarkable sonic results. M3’s ordered with the MPOD 3-Pt Stand come with a beautifully appointed case that includes six MPOD’s and a professional grade torque wrench that allows for periodic maintenance of the internal tension rods.SPECIFICATIONS Driver Complement: 1 X 1” (2.8cm) Diamond Coated Beryllium Dome Tweeter 1 X 6” (12.24cm) Graphene Nano-Tec Midrange 3 X 7” (17.78cm) Graphene Nano-Tec Bas Sensitivity: 91dB  Impedance: 4 Ohms Frequency Response: 24 Hz - 50 kHz Recommended Power: 20 - 500 watts Dimensions: 48"H x 19"D x 13W (120cm x 49cm x 34cm) Weight: 320 lbs. (145 kg)

MAGICO M6                                                                                                             a RICHIESTA         

Coppia diffusori in alluminio e carbonio 3 vie da pavimento in cassa chiusa
The M6 is a floor standing, three-way, five-driver loudspeaker design that establishes a new pinnacle of engineering and design vision at Magico.Since the release of the M-Project in 2014, Alon Wolf and his engineering team have worked to expand upon the ground breaking designs that were first introduced in the critically acclaimed product which included the application of carbon side panels. The new M6 represents the culmination of such efforts and a major advance in loudspeaker design. The most compelling aspect is the six-sided, monocoque enclosure sculpted of ½” carbon fiber, leveraging the latest Aerospace materials and technologies. Similar to the external shell of an F-35 fighter jet, this method of construction increases the structural strength-to-weight ratio by a factor of 60, while reducing overall weight by 50% and yielding outer dimensions that are 30% smaller without compromising internal volume. The curved interior and exterior walls minimize internal standing waves and eliminate external diffractions.

MAGICO MPROJET                                                                     a RICHIESTA

M-Project  diffusore  dinamico in alluminio 3 vie da pavimento in cassa chiusa

M Project Paying homage to everything Magico has built over the last ten years, we are proud to announce the release of the M Project, a limited-edition loudspeaker that encapsulates our spirit, our accomplishments, and our latest state-of-the-art technology that will – once again – set a new industry standard. With production limited to 50 pairs, The M Project will be uniquely positioned as a cornerstone for the most resolving and discerning music systems extant. A three-way, five-driver floorstanding loudspeaker – borrowing familiar motifs from the Q series, the original Mini, and the new S series – the M Project sports a newly designed curved shape, which minimizes internal resonances and enables an industry-leading minimal amount of damping. We further optimized our signature front baffle contour to incorporate edge-free top and bottom plates, integrating a new enclosure comprising aluminum skeleton topology, our signature acoustically optimized front plate, and carbon-fiber sides. SPECIFICATIONS MDriver Complement: 1 x 1" (2.54cm) Tweeter 1 x 6" (15.24cm) Graphene Midrange 3 x 10" (25.4cm) Nanotech Bass Sensitivity: 91dB Impedance: 4 Ohms Frequency Response: 20 Hz - 50 kH Recommended Power:   50-1000 Watts Dimensions: 56"H x 23"D x 15"W (145cm x 57cm x 37cm) Weight: 400 lbs. (180 kg


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MAGICO SCC                                                                                                      Listino  ufficiale  €. 24.500,00

I film richiedono molto ad un diffusore, dalle invasioni aliene alla caduta di uno spillo, da una colonna sonora roboante ad un bacio delicato. Na la funzione più importante è la resa accurata della voce umana molta della quale ancorata al centro dello schermo. La SCC prende spunto dai progetti della S5 e della entry level S1 e come tutti i prodotti Magico, è stata progettata utilizzando la tecnologia cad/cam attraverso il software customizzato. Questo per ridurre al minimo gli effetti delle diffrazioni e delle risonanze interne mantenendo il necessario smorzamento. Realizzato a partire da un estruso di alluminio di 16 pollici di diametro e mezzo pollice di spessore simile a quello della S5, l’involucro curvilineo della SCC fornisce la rigidità e la massa necessaria per garantire prestazioni ottimali ai suoi quattro driver in sospensione pneumatica pilotati dal crossover tre vie. Il comparto driver consiste di due woofer di nuova concezione a 7 pollici, un midrange con tecnologia Nano-Tec ed un tweeter al berillio. E’ presenta anche un supporto integrato e rimovibile. Come per tutti i diffusori della serie S, l’SCC è disponibile in varie finiture sia opache che high gloss per rendere questo diffusore facilmente inservibile in ogni ambiente. Canale centrale dinamico in alluminio, cassa chiusa, finitura opaca  Altoparlanti: 2 x 7” Mediobassi Nano-Tec® 1 x 6” Midrange Nano-Tec® 1 x 1” Tweeter MB-30 Sensibilità: 89dB Impedenza: 4 Ohms  Risposta in frequenza: 22 HZ – 50 kHz Potenza raccomandata: 50 – 1200 Watts Dimensioni (incluso lo stand integrato): 50,6cm H x 65cm L x 30cm P  Peso: 72 Kg

Scc Movies place huge demands upon a loudspeaker, from alien invasions to a pin dropping, from a thunderous soundtrack to a gentle kiss - but the most important function is the accurate rendition of that most recognizable of sounds, the human voice, most of which is anchored in the middle of the screen Reflecting the versatility and exhilarating performance of its new S-Series of loudspeakers, Magico’s SCC is designed to bring to the center channel of the home theater experience the same level of resolution, clarity, and emotional engagement that Magico loudspeakers have been bringing to music lovers for the past 15 years.This elegant loudspeaker builds on the foundation laid by the S5 and entry-level S1. In common with all Magico creations, the SCC has been designed using advanced computer-aided technology along with our own customized software to minimize diffraction effects and internal resonance, while determining the ideal damping requirements. eticulously crafted from 16-inch diameter extruded aluminum with half-inch thick walls similar to the S5, the curvilinear enclosure of the SCC provides the rigidity and mass necessary to ensure optimum performance from its four-driver, three-way acoustic suspension enclosure The driver complement consists of two newly-designed seven-inch woofers, Magico's famous proprietary five-inch Nano-Tec®midrange, and a Beryllium diaphragm tweeter. SPECIFICATIONS Driver Complement: 1 x 1" Tweeter 1 x 6" Midrange 2 x 7" Bass woofer Sensitivity: 89dB Impedance: 4 Ohms Frequency Response: 22 Hz - 50 kHz Recommended Power: 50 watts Dimensions (w/ Stand): 19.9"H x 14.2"D x 25.5"W (50.54cm x 58.42cm x 64.77cm) Weight: 160 lbs. (72.57 kg)


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


MAGICO S SUB                                                                                                                   Listino  ufficiale  €. 21.900,00

Subwoofer attivo (2000W) in alluminio con doppio woofer da 30,5cm (113kg

S-Sub Based on our award-winning S-range of loudspeakers, we proudly welcome into our family, the S-Sub Specifications: Driver Complement: 2 x 12" (30.48cm) Bass Drivers Sensitivity: 90dB Impedance: 4 Ohms Frequency Response: 15 Hz - 150 Hz Onboard digitally-controlled active crossover 2000W Amplifier Weight: 250 lbs. (113 kg)

MAGICO QSUB 15                                                                                                            Listino  ufficiale  €. 31.900,00


Il QSub 15  come potete immaginare dal loro nome, utilizzano driver da 15 e da 18 pollici, due per ogni sub, con un peso complessivo di 158 e di 258kg. Tutto questo è racchiuso in cabinet in alluminio che misurano rispettivamente 56cm H x 69cm P x 56cm L per il QSub 15 e 65cm H x 94cm P x 65cm L per il QSub 18. Non molto fi più di quanto ci si aspetterebbe da un sub a doppio cono. Quindi dove è concentrato tutto questo peso? La risposta è nei pannelli del cabinet che sono di alluminio pieno da 2 pollici di spessore. Questo, considerando anche il fatto che i due drivers in ogni sub sono rivolti in direzioni opposte e lavorano in controfase, contribuisce ad ottenere un sub con risonanze minime, basse pressioni interne e uno chassis virtualmente immobile.  Come risultato, il QSub 18 è in grado di esprimere la strabiliante pressione sonora di 136db di gamma assolutamente profondissima con una distorsione armonica totale a 20Hz misurata in meno del 1% e una estensione reale ed utilizzabile fino a 15Hz. Quale amplificatore serve per pilotare un tale colosso? Nel caso del QSub 18 è una bestia da 8000 watt con un alimentatore da 7000va. Entrambi i QSub 15 e 18 può essere ordinato nelle finiture satinate M-CAST o nella finitura anodizzata nera classica della casa. Altoparlanti: 2 x 15” QSub-15 Sensibilità: 90dB Impedenza: 4 Ohms Risposta in frequenza: 15 Hz – 150 kHz Dimensioni QSub-15: 56cm x 69cm x 56cm Peso: 158 kg.

MAGICO QSUB 18                                                                                                                                       a RICHIESTA         

Il QSub 18 come potete immaginare dal loro nome, utilizzano driver da 15 e da 18 pollici, due per ogni sub, con un peso complessivo di 158 e di 258kg. Tutto questo è racchiuso in cabinet in alluminio che misurano rispettivamente 56cm H x 69cm P x 56cm L per il QSub 15 e 65cm H x 94cm P x 65cm L per il QSub 18. Non molto fi più di quanto ci si aspetterebbe da un sub a doppio cono. Quindi dove è concentrato tutto questo peso? La risposta è nei pannelli del cabinet che sono di alluminio pieno da 2 pollici di spessore. Questo, considerando anche il fatto che i due drivers in ogni sub sono rivolti in direzioni opposte e lavorano in controfase, contribuisce ad ottenere un sub con risonanze minime, basse pressioni interne e uno chassis virtualmente immobile.  Come risultato, il QSub 18 è in grado di esprimere la strabiliante pressione sonora di 136db di gamma assolutamente profondissima con una distorsione armonica totale a 20Hz misurata in meno del 1% e una estensione reale ed utilizzabile fino a 15Hz. Quale amplificatore serve per pilotare un tale colosso? Nel caso del QSub 18 è una bestia da 8000 watt con un alimentatore da 7000va. Entrambi i QSub 15 e 18 può essere ordinato nelle finiture satinate M-CAST o nella finitura anodizzata nera classica della casa. Altoparlanti: 2 x 18” QSub-18 Sensibilità: 90dB Impedenza: 4 Ohms Risposta in frequenza: 15 Hz – 150 kHz Dimensioni QSub-18: 65cm x 94cm x 65cm Peso: 258 kg.


Telefona o invia un  e-mail per avere l'ultimo prezzo   0174 670100   Telefona o invia un  e-mail per avere l'ultimo prezzo 0174 670100  info@sinergy.us


M-Pod Isolatore per diffusori/elettroniche. Specifico per Q7, Q7 MKII, M-Project e S7 cadauno € 1.550,00
M-Pod 3 Platform per M3 Base smorzante di riferimento con tecnologia CLD di cancellazione delle risonanze cadauno a richiesta
M-Rack Mobile porta elettroniche in alluminio, rame e materiale smorzante, 250 KG a richiesta
QPOD Isolatore per diffusori/elettroniche cadauno € 650,00
SPOD8 Set 8 isolatori per diffusori S1MKII, S3MKII, S6MKII, V2, V3, Q1, Q3, Q5 € 4.390,00
SPOD8 plus Come sopra ma per diffusori S1 & S3 € 4.690,00
SPOD6 Set 6 isolatori per diffusori S5 € 3.290,00

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  colori  pelli e  tessuti

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Attenzione 

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a 

info@poltronenostress.it

info@newaudio.it

Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati. Prezzi franco nostro magazzino

Nota bene Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici