HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   ARREDO SONORIZZAZIONI AMBIENTI  HIFI  TV  VIDEO DIFFUSORI  PROIETTORI  SAT  POLTRONE   DIVANI   POLTRONE UFFICIO  ARREDO SONORIZZAZIONI AMBIENTI 

 



Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


EAT A-START                                                                                                                   Listino  ufficiale  €.    990,00

Giradischi a cinghia & braccio da 9 pollici in bianco o nero con coperchio parapolvere Versione con testina Ortofon 2MRed  1.090,00 euro

   

EAT B-SHARP                                                                                                               Listino  ufficiale  €.  1.450,00

Giradischi a cinghia & braccio da 9 pollici in bianco o nero con coperchio parapolvere Versione con testina Ortofon 2M Blue 1.590,00 euro

European Audio Team (E.A.T) announces B-Sharp turntable, with engineered cues taken directly from the company’s award-winning and highly acclaimed C-Major turntable. The B-Sharp sheds all of the non-essential cosmetic adornments of the C-Major without compromising performance or mechanical integrity, providing vinyl enthusiasts with a superb playback option at a more affordable price. The B-Sharp turntable features the new B-Note tonearm, made from a carbon fiber alloy that is light yet rigid with a black anodized aluminum headshell. The B-Note tonearm provides all of the key features for cartridge alignment and adjustability: VTA (Vertical Tracking Angle), SRA (Stylus Rake Angle), VTF (Vertical Tracking Force), azimuth and a slotted headshell for overhang / offset angle. The anti-skate mechanism has been engineered for more intuitive calibration, making setup of the B-Sharp notably easier than competitive products. A proprietary low noise motor, floating chassis, aluminum platter and a high-density MDF low profile base are included as standard features of the B-Sharp. Like the C-Major, the B-Sharp uses a high-tech TPE (thermoplastic elastomers) suspension system that works in concert with adjustable feet that provide levelling ability for the table. The B-Sharp comes equipped with a factory installed Ortofon 2M Blue Cartridge, hinged dustcover, low mass aluminum record clamp ( in some countries is not included) and a felt platter mat-all included. The B-Sharp delivers a level of performance commensurate with turntables at a significantly higher price Point. And we are confident that the B-Sharp will bring joy and lasting satisfaction to music aficionados everywhere. Factoring in the new tonearm, the easy-to-use anti-skate and the ready-to-play nature of the B-Sharp, we are confident that this product will become an instant classic.

EAT C-MAJOR                                                     Listino  ufficiale  €.  2.190,00

Giradischi a cinghia & braccio C-Note bianco o nero con coperchio parapolvere VERSIONE  C-Major SuperPack Come sopra ma con testina Ortofon MC Quintet Blue 2.590,00 EURO

A new entry level offering from E.A.T. that will satisfy seasoned music lovers who require a high-value-for-money turntable. E.A.T. is proud to announce the availability of its most important turntable to date: the C-Major. Why “important”? Because it represents a completely new price point, an entry level offering from E.A.T. that will satisfy all seasoned music lovers who require a high-value-for-money turntable, and a perfect solution for those new to the delights of the vinyl LP. We at E.A.T. have identified a segment of the hi-fi market where those who would like to purchase turntables with greater performance and sophistication than that which is available in the budget sector, but with a price point below the widely-acclaimed C-Sharp – our most successful turntable to date. And it is the technology of C-Sharp that enabled us to develop the C-Major. Pun intended, the differences between the C-Sharp and the C-Major are minor. All were incorporated to reduce costs and features, without compromising the performance. To achieve the lower price, the following changes were applied: The C-Note tonearm on the C-Major is 9” in length instead of 10”There is no separate speed controlThe main chassis has a more compact footprint The platter clamp is smaller The platter is smaller Shipped complete with fitted dust cover, and offered in a specially-priced package with the Ortofon Quintet Blue cartridge, the C-Major will extract the best from the vinyl LP –undoubtedly a blast from the past that just happens to be the future of music in the home! EAT C-Major turntable technical information Model EAT C-Major turntable Nominal speed 33/45 rpm, manual speed change Speed Variance 33rpm: ± < 0.09%, 45rpm: ± < 0.10% Wow and flutter 33rpm: ± < 0.05%, 45rpm: ± < 0.05% Signal to noise S/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -68 dB Downforce range 0 – 30 mN Supplied counterweight system Counterweight 110 g without additional insert → for cartridges 5 – 9 g Counterweight with additional insert 148 g →for cartridges 9 – 17 g Effective tonearm mass 14.5 g Effective tonearm lenght 230 mm Overhang 18 mm Power consumption 5 W max / 0.5W standby Voltage Universal swith mode power supply 15 V DC/1.6 A, 90-264 V AC, 47 - Dimensions (W × H × D) 460 × 352 × 125mm without dustcover, 460 × 352 × 142mm (closed dustcover), 460 × 380 × 435mm (opened dustcover) Weight (without box) 9 kg (turntable)

EAT C-SHARP                                                       Listino  ufficiale  €.  3.290,00

Giradischi a cinghia & braccio C-Note con pannello di controllo separato VERSIONE C-Sharp SuperPack Come sopra ma con testina Ortofon MC Quintet Black € 3.890,00

Thanks to new materials like Carbon Fibre and Termoplastic Elastomer EAT was designing a new superflat table.  EAT C-Sharp turntable EAT , leaded by Jozefina Lichtenegger, a lady with distinct for elegance and design, went into the turntable business with completely new approach . High End turntables get big,massy and bulky close to phallic. When the technical design goes into extrem! European Audio Team wants to offer tables with the maximum of technology and Performance but still elegant looking. The Forte and Forte S with their special designed superlative heavy platter have been a revolution in the Highend AudioMarket . Never a turntable combined such Kinetic energie in such elegant products. Later the E-Flat topped the concept with the first unseeable super falt highend platter in a wonderfull mass loaded dual Motor Design. The success of the E-Flat motivated EAT to bring an even more elegant and slim turntable to the market. The C- SHARP Thanks to new materials like Carbon Fibre and Termoplastic Elastomer Eat was designing a new superflat table. The low profil base chassis is made out of highest density MDF. Because of its flatness this base sits perfectly stable on any surface! On this base the ultra low noise motor is mounted as well as 10 damping feets out of energy absorbing TPE (Termoplastic Elastomers = Hightech high energy absorbing damping material). The cone shape TPE columns carry a SANDWICH subchassis out of Carbon Fibre and MDF composite with ultimate rigidity. The stiffness is important to be a super rigid base for the tonearm/cartridge and bearing/platter as there must be 100 % no moving tolerance between the distance of the groove and the tracking cartridge. All the rumble of the platter / bearing is directed in the TPE columns. On opposite the TPE avoid that any unwanted energie of motor and surface or surrounding vibration leads to the subchassis or even to the tonearm cartridge. The bearing is an oversized inverted with a inert, resonance free ceramic ball on top Around the bearing we set a super heavy 700g mass point which sucks up all energy arround.The stiff carbon subchassis helps to transport all vibration in this mass point.So vibrations are transferred in heat The platter intself is from a special alloy of very inert aluminium and is also damped by TPE inserts-It from 2 parts a subplatter and a mainplatter to keep it flat although having very high mass and kinetic energie. The belt is made from special anti-static rubber. It’s glued and then polished. The tonearm itself is a completely new design which combines all advantages of a unipivot arm with a cardan design. The uni-pivot in the middle only helps bearing to be less loaded. The traditional Cardan bearing insures high stabilty and easy ness of use with very low friction. Also inside the tonearm is a special silicon-based grease to damp the tonearm / cartridge resonances by more then 50% The tube is again out of carbon , super stiff and rigid. The headshell we made out of special light and rigid aluminium to get a perfect combination of the advantages of carbon with the better inner damping of the aluminium as well as the possibility of more tighter mounting of Highend MC cartridges. An external DC powersupply unit with an AC Generator creates new total clean power for the motors . For sure you have also 33 /45 electronic switching. A HIGHEND solution as the whole table.  Model EAT C-Sharp turntable Nominal speed 33/45 rpm, driven by microprocessor, separate control panel, lighted control buttons Speed Variance 33 rpm: ± < 0,08%, 45 rpm: ± < 0,09% Signal to noise S/N Ratio ( mechanical noise): – 40 dB, Signal to noise (electrical noise): -70 dB Downforce range 0 – 30 mN Supplied counterweights without additional insert → for cartridge 5 – 9g (125g), with additional insert → for cartridge 8,5 – 13g (142g) Effective tonearm mass 16.5 g Effective tonearm lenght 254 mm Overhang 16 mm Power consumption 8,5 W max / 0,5 W stanby Voltage Universal swith mode power supply 15 V DC / 1,6 A, 90-264 V AC, 47 – 63Hz Dimensions (W × H × D) 500 × 400 × 115mm without connectors, 500 × 435 × 115mm with connectors in the rear panel Weight (without box) 13,5 kg + 0,5 kg Separated control panel

EAT E-FLAT                                                                          Listino  ufficiale  €.  4.490,00

Giradischi a cinghia & braccio in carbonio  VERSIONE Yosegi   Giradischi a cinghia & braccio in carbonio e testina phono Yosegi  5.590,00 euro

European Audio Team Announces Its Third Turntable … With A Radical New Tonearm!  EAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses. E-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides. A further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted. A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.” This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter. As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design Dimensions (WxHxD) 500x400x145mm turntable weight 18,7kg Platter weight 6,9kg Platter diameter 340mm Wow and Flutter +-0,01 Tonearm Flat, CarboneEffective length 254mm, 10 InchMounting distance 238mm Overhang 16mm Effective mass 4mm 19.5g Effective mass 3mm 12.5g

EAT FORTE S                                         Listino  ufficiale  €.  5.590,00

Versione  Ikeda Makassar Giradischi a cinghia & braccio Ikeda IT407 da 12 pollici  € 13.490,00

Versione  Ikeda Piano Black Come sopra ma con finitura Piano Black                     € 12.990,00

Versione  C-Note Makassar Giradischi a cinghia con braccio C-Note da 12 pollici      € 7.490,00

Versione  C-Note Piano Black Come sopra ma con finitura Piano Black                    € 6.990,00

Versione  Project Makassar Giradischi a cinghia con braccio Project da 12 pollici     € 6.490,00

Sulla base dello straordinario modello Forte, ecco che EAT è orgogliosa di presentare il modello Forte S ove quest’ultima lettera significa “small” (piccolo); ed in effetti, partendo dalla base del modello superiore e riducendo le dimensioni della base e del piatto e semplificandone un poco la costruzione, EAT ha potuto così garantire il quasi rispetto delle superlative prestazioni offerte dal modello top, ad un costo notevolmente più ridotto.In questo modello il piatto è sempre composto di due parti ed il peso è ridotto (si fa per dire...) a 15 Kg e distribuito su una circonferenza di 360 mm di diametro (in luogo dei 400 del modello Forte); il momento d’inerzia è sempre elevatissimo (svariate volte superiore a quello di un comune giradischi) al fine di ottenere una eccellente costanza di rotazione grazie alla insensibilità alle perturbazioni rotazionali del sistema. I due motori sono ora disposti in modo tale da utilizzare una sola cinghia ed il braccio consigliato è il Project da 12” in luogo dell’Ikeda di pari lunghezza. I risultati all’ascolto, tuttavia, saranno tali da convincere anche il più fervente appassionato di... musica liquida a ritornare all’ascolto del vinile.  Sulla base dello straordinario modello Forte, ecco che EAT è orgogliosa di presentare il modello Forte S ove quest’ultima lettera significa “small” (piccolo); ed in effetti, partendo dalla base del modello superiore e riducendo le dimensioni della base e del piatto e semplificandone un poco la costruzione, EAT ha potuto così garantire il quasi rispetto delle superlative prestazioni offerte dal modello top, ad un costo notevolmente più ridotto. In questo modello il piatto è sempre composto di due parti ed il peso è ridotto (si fa per dire...) a 15 Kg e distribuito su una circonferenza di 360 mm di diametro (in luogo dei 400 del modello Forte); il momento d’inerzia è sempre elevatissimo (svariate volte superiore a quello di un comune giradischi) al fine di ottenere una eccellente costanza di rotazione grazie alla insensibilità alle perturbazioni rotazionali del sistema. I due motori sono ora disposti in modo tale da utilizzare una sola cinghia ed il braccio consigliato è il Project da 12” in luogo dell’Ikeda di pari lunghezza. I risultati all’ascolto, tuttavia, saranno tali da convincere anche il più fervente appassionato di... musica liquida a ritornare all’ascolto del vinile.

EAT FORTE               Listino  ufficiale  €.  7.990,00

 

Versione Ikeda Makassar Giradischi a cinghia con motore separato e braccio Ikeda IT407 da 12 pollici          € 15.490,00

Versione  Ikeda Piano Black Come sopra ma con finitura Piano Black                                                          € 14.990,00

Versione  C-Note Makassar Giradischi a cinghia con motore separato e braccio C-Note da 12 pollici                € 9.490,00

Versione   C-Note Piano Black Come sopra ma con finitura Piano Black                                                         € 8.990,00

Versione   Project Makassar Giradischi a cinghia con motore separato e braccio Project da 12 pollici               € 8.490,00

GIRADISCHI “FORTE” by EAT Il progetto del giradischi EAT “Forte” è basato su due elementi costruttivi fondamentali: sottotelaio separato e massa considerevole. Nel “Forte” EAT ha realizzato appieno tali caratteristiche. La struttura del telaio è molto pesante, con massa accresciuta dall’inserimento di sabbia metallica, mentre i piedi di appoggio sono sospesi magneticamente, e si comportano, in effetti, come un sottotelaio meccanicamente separato. Piatto Il piatto del “Forte” si compone di due parti. La prima sezione sfrutta una lega “dolce”, la seconda una più dura e rigida, così da contrastare la propagazione dell’energia meccanica. La prima sezione incorpora anche alcuni magneti al neodimio. Il solo piatto pesa oltre 20 kg ed ha un diametro di ben 400 mm., in luogo degli usuali 300: il risultato è che l’energia cinetica immagazzinata da questo elemento, in rotazione a 33 rpm, raggiunge l’incredibile valore di 2460 joules! Tutto ciò comporta un notevole incremento della massa mobile, a parità di peso. Il piatto contiene anche “sorbothane”, che lo rende immune dalle risonanze. Tappetino in vinile (Vynil Matt) Il tappetino “Vinyl Matt” è realizzato con dischi in vinile riciclati e costituisce un’interfaccia ottimale tra disco e piatto. Un pressore mantiene il disco a perfetto contatto con questo speciale tappetino. Costruzione del gruppo Perno-Cuscinetto Il perno è “invertito”, con alberino maggiorato e lucidato. Sulla sommità è collocata una sfera in ceramica, materiale durissimo ed inerte. Questa, in abbinamento con una placca di teflon, opera quasi fosse un cuscinetto speculare e costituisce un ottimo mezzo di smorzamento. La superficie in teflon, accuratamente satinata, assicura un moto molto fluido, “morbido” e privo di rumore (rumble). Il piatto sfrutta, poi, un sistema di sospensione magnetica con magneti al neodimio. Grazie alla sospensione magnetica è possibile mettere e mantenere in movimento la considerevole massa del piatto, senza che il perno subisca pressoché alcuna pressione (di solito un piatto molto pesante produce livelli elevati di rumore, il cosiddetto rumble). Nel “Forte” la pressione sul perno è regolabile, cosicché ciascun utente può adattarla alle proprie preferenze ed al proprio gusto, in base ai dettami delle diverse “filosofie” che esistono al riguardo. Piedi magnetici La struttura del giradischi poggia su larghi piedi magnetici, caratterizzati da uno speciale sistema di sostegno e di stabilizzazione.  Tale sistema garantitsce al “Forte” un isolamento, prossimo al 100%, dalla risonanze del pavimento e dell’ambiente. Il sistema a cuscinetto magnetico si traduce in una combinazione teflon-ceramica quanto mai silenziosa.Solitamente, pressioni elevate causano la rapida usura del perno. Ciò non accade con l’EAT “Forte”, grazie alla ridottissima pressione risultante dalla sospensione magnetica. Motore L’unità motrice del giradischi è fisicamente separata dal telaio principale, assieme a tutta la componentistica necessaria per l’alimentazione. Il ricorso a circuitazioni elettroniche molto sofisticate rende la corrente, utilizzata per il movimento del piatto, perfettamente “pulita”. Anche l’unità motrice ha peso rilevante, per minimizzare l’effetto delle vibrazioni, assorbite e dissipate attraverso l’uso di un “sandwich” di metallo ed MDF.A drastica riduzione del rumore, normalmente prodotto da qualunque motore, EAT ha fatto ricorso ad una configurazione “dual motor”: adottando due motori, di potenza relativa, il moto è silenziosissimo e la “coppia” ottimale. Trasmissione Cinghie di trasmissione molto lunghe portano, per lo più, vibrazioni difficilmente dissipabili. Per evitare questo effetto, EAT ha impiegato per il “Forte” cinghie in silicone speciale. A scongiurare i disturbi imputabili alla propagazione di vibrazioni residue, concorrono i piedi magnetici, nonché la stessa enorme massa del piatto. L’EAT “Forte” e l’energia L’energia cinetica che si propaga dal suolo è neutralizzata attraverso i piedi magnetici. L’energia trasmessa dall’aria ambientale è dissipata attraverso il massiccio telaio in MDF, riempito con sabbia metallica. L’energia proveniente dal braccio di lettura e dalla testina è assorbita dall’impiego di una base per il braccio in metallo pesante, isolata con “sorbothane”. L’energia trasmessa dalle cinghie è catturata dalla massa del piatto stesso e dalla doppia cinghia in silicone.L’energia proveniente dall’unità motrice è neutralizzata grazie dalla tecnologia del doppio motore, dalla sede separata per l’alloggiamento dei motori e dalla massa appesantita del telaio che li ospita. L’energia del perno è assorbita dalla sfera di ceramica, dalla placca in teflon e dalle caratteristiche costruttive del perno, sostenuto da magneti. In conclusione, il giradischi EAT si “mangia” (to eat…) l’energia spuria, con enorme beneficio per il risultato sonoro

A massive machine that gets the best out of your vynil. Separate Sub Chassis and a mass loaded turntable gives us the best of both worlds.  The design of the Eat Forte turntable is based on a combination of two basic principles: Separate Sub Chassis and a mass loaded turntable This gives us the best of both worlds. The chassis of the table is very heavy and mass-loaded using metal-fi lled sand. The feet are magnetic and act as a sub chassis to support the table. Platter The platter consists of two parts. The fi rst part uses a soft alloy, the second part, a harder one. This reduces energy fl ow. The fi rst part also incorporates the neodymium magnets. The platter weighs more than 20 kg (44 lbs). The diameter of the platter is 400 mm (15.75 1/2) (not the usual 300 mm [11.8 1/2]). Kinetic energy stored in such big platter turning at 33 RPM is an incredible 2460 Joules! This means that with the same weight you gain more moving mass on the platter. The platter also incorporates sorbothane damping to make it resonance free. Vinyl matt The vinyl matt is made from recycled vinyl records crating a perfect interface for the record. A clamp holds the record on the vinyl matt. Bearing construction The bearing is not standard but inverted with an oversized polished shaft. A ceramic ball is used on the top because it is very hard and inert. This, in combination with a Tefl on plate as a bearing mirror, is also a good damping device. Tefl on’s accurate satin surface produces perfectly smooth movement without any rumble. The platter has a magnetic suspension using neodymium magnets. By increasing the distance from the bearing to the cartridge, the small neodymium magnets eliminate magnetic infl uence on the cartridge. Due to the magnets we can still move a large mass allowing the bearing to see virtually no pressure. This avoids rumble. (A mass loaded platter usually causes high levels of rumble.) The pressure of the bearing is adjustable. There are existing different philosophies about bearing pressure. With the Forte turntable you can adjust it according your preferences and taste. Magnetic Feet The table has large magnetic feet with a bearing and stabilization system. It guaranties close to 100% isolation from the fl oor and from airborne resonances. The magnetic bearing system allows us to use the extra silent Tefl on-ceramic combination. Usually high pressure would cause the bearing to wear out over the time. This does not happen because of the very low pressure created by the use of the magnetic system. Motor The motor is a stand-alone, decoupled AC unit. It uses a sophisticated electronic circuit to create 100% clean AC. It is very heavy motor with lot of mass to reduce all the existing vibrations. Motor energy is absorbed by using a sandwich system of metal and MDF. We decided to use a “dual motor design” to eliminate noise in the motor. By using two relatively weak, but silent running motors, we achieve perfect torque. Belt Long belts usually have some amount of wobble. To avoid this we use a special silicon string. This movement is also absorbed by the bearing block and by the huge mass of the platter itself. EAT the Energy The EAT Forte turntable is all about eating energy.◾Energy from the ground is decoupled by magnetic feet.◾Energy from the air is decoupled from the heavy chassis that is made from MDF and fi lled metal sand.◾Energy from tone arm and cartridge is absorbed by using a heavy metal tone arm base isolated by sorbothane.◾Energy from the belt is captured by the mass of the platter and by the string itself.◾Energy from the motor is captured by the dual-motor design, the decoupled motor unit and the mass-loaded motor chassis.◾Energy of the bearing is catch by the ceramic ball, the Tefl on plate and the magnetic bearing construction. Technical specifications EAT Forte: Electronic speed change * 33.33/* 45.11 Speed variance ±0.09% Wow and flutter ±0.008% Signal-to-noise ratio -73dB Power consumption 2W Outboard power supply 16V/1.000mA AC, suitable for your country's mains supply Dimensions (WxHxD) 700x250x440mm Weight 65kg


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

 

EAT Jo No. 5                                                                                                                                           Listino  ufficiale  €. 1.190,00

Testina phono  mca  eat

 

EAT YOSEGI                                                                                                                                            Listino  ufficiale  €. 1.590,00

Testina phono  mca  eat

JEWELS MADE OF WOOD RESONANCE … The Truth The more we talk about the mechanical/electrical transducer, the clearer it becomes that the choice of material and its resonance characteristics are audible. The cartridge and all that comprise it are the most sensitive parts of an audio reproduction chain. Here is the transfer of the mechanical modulation into an electrical signal, and here is the signal the weakest!!! Wood has always been one of the most-used materials in audio. Yet various woods, as well as MDF, have specific structures and densities, and therefore possess their own characteristic "sound". MDF is too heavy and too dull for many applications. Additionally, you have to treat MDF with additional surfaces to make it visually attractive and domestically acceptable. Its composition is not always conducive to creating tiny structures, leading to a lack of precision in manufacturing. Natural woods lend themselves to being worked into myriad shapes, with exquisite finishes. Most relevant to audio, woods can be super hard and totally inert. YOSEGI “Yosegi” the traditional Japanese method of making objects with real value. A number of “micro-quadratic” pieces of various types of natural wood are glued together with special resins. It demands incredible, high-precision work abilities, the levels which are only available from the hands of long-trained, highly-skilled specialists. The results are “Jewels Made of Wood”!!! Yosegi techniques are expensive, but capable of yielding exceptional beauty protected by extremely high durability. What better is use is there for this culture than applying it to the bodies of phono cartridges and cartridge headshells? The new EAT Yosegi cartridge and headshell are transformed with Yosegi wood into the most elegant objets d’art … and sound An audiophile dream is to possess a rare and valuable object of incomparable sound quality. This is realised with Yosegi. At the heart of the cartridge are selected motors, cantilevers and diamonds, of the calibre expected of the very best Japanese-made pick-ups. Thanks to the combination of traditional Yosegi woodworking art and modern high-end materials, the EAT Yosegi cartridge produces wonderfully smooth but vivid and open reproduction of the stored music. It is an ideal symbiosis of tradition, art and modern technology, enhanced by its inherent exclusivity. Listen … and enjoy! Yosegi  Specification: Cartridge type: Moving-coil Frequency response: 15-50kHz Output voltage: 0.4mV @ 1kHz, 5cm/sec Channel separation: 30dB @ 1kHz Output balance: 0.5dB @ 1kHz Vertical tracking force: 1.8-2.2g Coil impedance: 12Ω (1kHz) DC-resistance: 12Ω Coil inductance: 26μH (1kHz) Static compliance: 35×10-6cm/dyne Dynamic compliance: 18×10-6cm/dyne (100Hz) Vertical tracking angle: 23° Weight: 6g


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

EAT C-NOTE 12                                                                                                                                    Listino  ufficiale  €. 1.990,00

Braccio di lettura 12 pollici in carbonio

EAT C-NOTE 10                                                                                                                                    Listino  ufficiale  €. 1.790,00

Braccio di lettura 10 pollici in carbonio

EAT C-NOTE  9                                                                                                                                      Listino  ufficiale  €. 1.590,00

Braccio di lettura 9 pollici in carbonio

EAT IKEDA IT407                                                                                                                              Listino  ufficiale  €. 7.990,00

Braccio di lettura 12 pollici


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

EAT  E-GLO S                                                                                                                                Listino  ufficiale  €.  2.690,00

Pre phono a valvole MM/MC ingressi e uscite RCA

Elegant high-end tube phono pre-amplifier with ultra slim design! E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors. RIAA curve is equalised fully passive and splitted in two steps which allows to achieve perfect impedance matching between the gain stage and equalization block. Phono preamplifier doesn’t have any global feedback. It has a massive aluminium chassis, large possibility of adjusting the impedance, capacity and gain. It has subsonic filter with mild effect which doesn’t affect audible frequencies in unpleasant way. A very important part is the advanced power supply that uses anode voltage regulation and a well filtrated voltage. Filtration is in three steps, this result is a perfect S/N ratio and undisturbed musical experience.Input impedance MC 10,25,50,75,100,1000 Ohm Load capacity 50,100,150,200,270,320,420 pF Output impedance 100 ohms Load capacity 50,100,150,200,270,320,420 pF Gain MM 45 dB Gain MC 45,50,55,65,70 dB RIAA accuracy within 0,5dB/20Hz – 20kHz Subsonic 18 dB / Octave Input RCA Output RCA Power supply DC18V/1 Dimensions W × H × D 435 × 90 × 270 mm

EAT  E-GLO                                                                                                                                Listino  ufficiale  €.  6.290,00

Preamplificatore phono a valvole MM/MC ingressi e uscite RCA (4) ECC83 e (2) ECC88

A feast for the eyes!  EAT E-GLO phono stage, Prague, 10 May 2013: Completing its analogue ‘front-end’, E.A.T. proudly announces the definitive phono stage to accept the signals from its range of turntables, tone-arms and Yosegi cartridges. The E-GLO looks and performs like no other, a design so clever and attractive that owners will want to give it pride-of-place in their sound systems. After all, it complements the stunning Forté, Forté S and E-Flat turntables! First shown privately to the trade at CES in Las Vegas this past January 13, E-Glo is now ready for its public debut at the Munich High End Show. E-Glo is an all-tube design completely free of semiconductors in its signal path. Its tube complement consists of the classic glassware beloved of audiophiles: four ECC83s and two ECC88s. The use of these valves will ensure that supplies of replacement tubes are always readily available, while experimentation is encouraged for those who love to fine-tune the sound of their systems by changing tubes, such as EAT’s premium offerings.In the fully-balanced input stage, we fitted a Lundahl step up transformer with an amorphous core, type LL1932. The unit’s gain is 45db, plus the voltage gain of the step-up transformer. E-Glo’s amplifier section uses split, fully passive equalisation, without any equalisation in global negative feedback loop, which can harm the sound. At this level of performance, only the best components will suffice. The choice of output capacitor is the highly-praised Mundorf. All other capacitors are WIMA. Mundorf Connectors with Teflon insulation have been chosen for their unparalleled integrity. To ensure the utmost flexibility, to ensure perfect matching to a wide range of cartridges, the E-Glo provides capacitance loading for moving-magnet types in six user-switchable steps from 47pf to 900pF. ‘The loading resistance for moving-coil cartridges is continuously adjustable,’ says Lichtenegger, ‘as we already have on our Phono Box RS.’ Ensuring quiet operation is the use of an external power supply, connected to the E-Glo via a special 9-pin connector, familiar to those who recall the legendary Cello Palette preamplifier. Its heart is a custom-made toroid transformer. The transformer features double shielding between the primary and secondary windings. This avoids the intrusion of RFI, while acting as superior mains filter. Separate power supplies feed the tube phono preamplifier because the best way to shield a mains transformer from electromagnetic radiation of is to distance it from the electronics. Metal shielding alone cannot perform the task as well as a separate power supply. For the rectifying circuitry, EAT fitted special diodes with noise suppressing resistors. Also employed are high-quality electrolytic capacitors, followed by a voltage regulator with capacitor multiplier. The power component is a FET transistor. A feast for the eyes, the handsomely styled E-Glo is housed in a 435x60x250mm chassis, is valves peering through cleverly design heat sinks that recall the two spools of a reel-to-reel tape deck. Across the front section are rows of switches for instant access to all settings – no need to ‘get inside’ to set the E-Glo for your cartridge of choice. E.A.T.’s E-Glo is a state-of-the-art phono stage able to extract the ultimate performance from any cartridge it asked to accommodate.Technical specifications Input impedance MC:10,20,40,80,150,300,600,1200 Ohm / 70dB 2,5,10,20,40,80,150,300 Ohm / 76dB Load capacity: 50,150,270,370,520,620,740,840 pF Output impedance: < 150 ohms Gain MM: 46dB Gain 1 MC: 76dB Gain 2 MC: 70dB Signal to noise Ratio: MM 65dBV (80dBV – IEC -A) MC 65dBV (79dBV – IEC -A) THD, MM / MC: Available in two colour Options: high gloss Makassar or high gloss piano Black


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it


 

EAT COLL DAMPER                                                                                                                             Listino  ufficiale  €.     25,00

COOL DAMPER ANELLI SMORZATORI MULTIFUNZIONALI I Cool Damper sono dispositivi radicalmente nuovi per l’accessoristica delle valvole. Questi prodotti audio, elegantemente fabbricati, non solo aggiungono un tocco di stile alle valvole, circondandole di nuovi simpatici colori, ma migliorano in modo eccezionale il comportamento sonoro del sistema audio, grazie ad un suono che ridefinisce le tecniche di smorzamento. I materiali scelti con grande attenzione per i Cool Damper ne consentono un impiego efficace contro le vibrazioni ed i risultati consistono in una minore distorsione ed in un’ampia riduzione della microfonicità, una tendenza mostrata dalla maggior parte delle valvole. Inoltre, l’uso dei Cool Damper porta a bassi più controllati, ad un campo sonoro più pulito, ad una gamma dinamica più vivida e più evidente e ad una migliore focalizzazione dell’intera scena musicale.I Cool Damper riducono anche la temperatura dell’involucro delle valvole di circa il 10%, contribuendo apprezzabilmente ad allungarne la durata. I Cool Damper esercitano poi un forte potere schermante ed aiutano così la reiezione delle radiofrequenze ed a questo proposito sono disponibili cavi opzionali in rame placcato in argento di tre differenti lunghezze: cm 15, 30 e 150. I Cool Damper sono il risultato di oltre sedici mesi di ricerche e sviluppi rigorosi. Dopo numerose prove, abbiamo trovato, quale materiale più idoneo per la loro realizzazione, un’estrusione di alluminio relativamente morbido, ricoperta da un particolare materiale composto da Teflon e PTFE. Le forme precise di questi anelli sono rifinite con colori durevoli attraverso trattamenti anodici, per essere esteticamente pregevoli, oltreché funzionali, per le preziose valvole dei componenti audio. Per assicurare un abbinamento ottimale tra i Cool Damper ed il vetro di vari tipi di valvole, ogni smorzatore è munito di sei speciali contatti elastici. Il design appropriato e i materiali impiegati compensano le naturali risonanze del vetro e dell’alluminio, trasformando l’energia meccanica delle vibrazioni in energia termica, che viene poi dissipata sotto forma di radiazione di calore.Smorzatori per le valvole, sotto diverse forme, sono stati impiegati per molti anni, ma i Cool Damper sono molto più efficaci e meritano quindi di essere ascoltati.

 

 

EAT  CAPPA C-SHARP                                                                                                                                  Listino  ufficiale  €.   450,00

 

EAT  VINYL ESSENTIAL                                                                                                                                Listino  ufficiale  €.       30,00

Disco test in vinile

 


 

Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it



 Legenda istruzioni

Clicca per qui per vedere :  FOTO PRODOTTO

Clicca per qui per vedere :  ISTRUZIONI PRODOTTO

Clicca per qui per vedere :  CATALOGO,PROVA RIVISTE SPECIALIZZATE PRODOTTO


Nota  bene *

Per ordinare o avere gli ultimi prezzi aggiornati telefona al  0174 670100 o invia un E-mail a   info@newaudio.it

*I prezzi indicati  sono  di  listino  ufficiale  delle case produttrici ,nel  caso  di  diffusori  si  riferisce al prezzo  del  singolo  diffusore  per  offerte  ed  eventuali  promozioni  telefonare o  inviare e-mail.

*Il presente listino sostituisce ed annulla ogni precedente. Le caratteristiche e i prezzi indicati  possono variare senza preavviso telefonare o inviare un e-mail per ulteriori domande e conferme sui prezzi sopra riportati.

*Tutti i marchi citati nel presente listino sono di proprietà e registrati alle rispettive Case Produttrici

*Prezzi franco nostro magazzino


Telefona o invia un  e-mail per avere l'ultima offerta   0174 670100   Telefona o invia un  e-mail per avere l'ultima offerta  0174 670100  info@newaudio.it